Retrieving Data from BlueField Via IPMB

bluefield_temp

0

Support NIC monitoring of BlueField's temperature

p0_temp

5

Port 0 temperature

p1_temp

6

Port 1 temperature

p0_link

7

Port0 link status

• 0x100 – connection OK

• 0x200 – connection error

p1_link

8

Port1 link status

• 0x100 – connection OK

• 0x200 – connection error

update_timer

0

set_emu_param.service is responsible for collecting data on sensors and FRUs every 3 seconds. This regular update is required for sensors but not for FRUs whose content is less susceptible to change. update_timer is used to sample the FRUs every hour instead. Users may need this timer if they are issuing several raw IPMItool FRU read commands. This helps assess how many times users must retrieve large FRU data before the next FRU update.
update_timer is a hexadecimal number.

fw_info

1

ConnectX firmware information, Arm firmware version, and MLNX_OFED version
The fw_info is in ASCII format

nic_pci_dev_info

2

NIC vendor ID, device ID, subsystem vendor ID, and subsystem device ID
The nic_pci_dev_info is in ASCII format

cpuinfo

3

CPU information reported in lscpu and /proc/cpuinfo
The cpuinfo is in ASCII format

emmc_info

8

eMMC size, list of its partitions, and partitions usage (in ASCII format).
eMMC CID, CSD, and extended CSD registers (in binary format).

The ASCII data is separated from the binary data with StartBinary marker.

qsfp0_eeprom

9

FRU for QSFP 0 EEPROM page 0 content (256 bytes in binary format)

qsfp1_eeprom

10

FRU for QSFP 1 EEPROM page 0 content (256 bytes in binary format)

ip_addresses

11

This FRU is empty at start time. It can be used to write the BMC port 0 and port 1 IP addresses to the BlueField. They follow these formats:

BMC: XXX.XXX.XXX.XXX
P0: XXX.XXX.XXX.XXX
P1: XXX.XXX.XXX.XXX

The size of the written file should be 61 bytes exactly.

eth0

13

Network interface 0 information. Updated once every minute.

eth1

14

Network interface 1 information. Updated once every minute. 

bf_uid

15

BlueField device UUID

eth_hw_counters

16

List of ConnectX interface hardware counters

oob0

17

Out-Of-Band port network interface 0 information. Updated once every minute.

bf_fru

18

FRU information of the BlueField

produce_name

19

The BlueField product name