Known Issues in This Release

N/A

Description: The Cable Validation Tool does not support unmanaged switches

Keywords: Unmanaged Switch

Discovered in Release: 1.0.0

4180059

Description: Following the addition of XDR capabilities, please note the following updates and adjustments when using the Cable Validation Tool:

1. Port 8251 Configuration on NVOS Switch:
   Users must open port 8251 on the NVOS switch by executing the following commands: 

   nv set acl AAA type ipv4
   nv set acl AAA rule 1 match ip tcp dest-port 8251
   nv set acl AAA rule 1 action permit
   nv set interface eth0-1 acl AAA inbound control-plane
   nv c a
   

2. CVT is supported only on Blackmamba and not on crocodile

Keywords: XDR, NVOS, Switch, UI

Discovered in Release: 1.4.0

4188077

Description: Scalability - Open 8251 on switch. On Cumulus and NVOS switches the port 8251 needs to be opened by the user

Keywords: Cumulus, NVOS

Discovered in Release: 1.0.0

4560524

Description: The UI does not redirect to the login page if the user becomes unauthorized for any reason.

Keywords: Login, Unauthorized User, UI

Discovered in Release: 1.6.0

 4575762

Description: The RX/TX traffic stats show count as 0 for bytes, drops, errors.

Keywords: Traffic Stats

Discovered in Release: 1.6.0

4575765

Description: Setting CV_DOT_IN_HOSTNAME in cvt_env.conf does not work as expected when hostname have a dot in them.

Keywords: P2P

Discovered in Release: 1.6.0

4570374

Description: Setting the managed field to 'no' in nodes sheet of unified_topo p2p for switches does not work. Issue not seen on hosts.

Keywords: P2P, Unified topo

Discovered in Release: 1.6.0