NVIDIA ConnectX-5 InfiniBand/Ethernet Adapter Cards for OCP Spec 2.0 User Manual
NVIDIA ConnectX-5 InfiniBand/Ethernet Adapter Cards for OCP Spec 2.0 User Manual
Breadcrumbs

Linux Driver Installation


This section describes how to install and test the MLNX_OFED for Linux package on a single server with a ConnectX-5 adapter card installed.

Prerequisites

Requirements

Description

Platforms

A server platform with a ConnectX-5 InfiniBand/VPI adapter card installed

  • MT4119 ConnectX®-5 (VPI, IB, EN) (firmware: fw-ConnectX5)

Required Disk Space for Installation

1GB

Operating System

Linux operating system.
For the list of supported operating system distributions and kernels, please refer to the NVIDIA OFED Release Notes file.

Installer Privileges

The installation requires administrator (root) privileges on the target machine.

Downloading NVIDIA OFED

  1. Verify that the system has a NVIDIA network adapter installed.
    The following example shows a system with an installed NVIDIA adapter card:

    # lspci -v | grep Mellanox
86:00.0 Network controller [0207]: Mellanox Technologies MT27620 Family
        Subsystem: Mellanox Technologies Device 0014
86:00.1 Network controller [0207]: Mellanox Technologies MT27620 Family
        Subsystem: Mellanox Technologies Device 0014


    For Linux driver installation, please refer to NVIDIA DOCA Installation Guide for Linux.

Last updated: