The chapter contains the following sections:
These are the release notes for the NVIDIA® ConnectX®-6 DE adapters firmware. This firmware supports the following protocols:
-
InfiniBand - SDR, QDR, FDR, EDR, HDR100, HDR
-
PCI Express 4.0, supporting backwards compatibility for v3.0, v2.0 and v1.1
1. Speed that supports both NRZ and PAM4 modes in Force mode and Auto-Negotiation mode.
When connecting an NVIDIA-to-NVIDIA adapter card in ETH PAM4 speeds, Auto-Neg should always be enabled.
Please make sure to use a PCIe slot that can supply the required power to the ConnectX-6 DE adapter card as stated in section Specifications in the adapter card’s User Manual.
Supported Devices
This firmware supports the devices and protocols listed below:
Refer to the hardware
documentation
for the list of supported devices.
Driver Software, Tools and Switch Firmware
The following are the drivers’ software, tools, switch/HCA firmware versions tested that you can upgrade from or downgrade to when using this firmware version:
|
|
Supported Version |
|---|---|
|
ConnectX-6 DE Firmware |
22.46.1006 /22.45.1020 /22.44.1036 |
|
DOCA-HOST |
3.1.0 / 3.0.0 Note: For the list of the supported Operating Systems, please refer to the driver's Release Notes. |
|
WinOF-2 |
25.7.50000 /25.4.50020 /25.1.51010 Note: For the list of the supported Operating Systems, please refer to the driver's Release Notes. |
|
MFT |
4.33.0-169 /4.32.0-120 /4.31.0-149 Note: For the list of the supported Operating Systems, please refer to the driver's Release Notes. |
|
FlexBoot |
3.8.100 |
|
UEFI |
14.39.13 |
|
MLNX-OS |
3.12.2002 onwards |
|
Cumulus |
5.11.0.0026 onwards |
|
NVIDIA Quantum Firmware |
27.2014.2084 onwards |
|
SwitchX-IB 2 Firmware |
15.2010.5108 onwards |
|
SwitchX-IB Firmware |
11.2008.3328 onwards |
Last updated: