Troubleshooting

• Ensure that the adapter is placed correctly

• Make sure the adapter slot and the adapter are compatible
  Install the adapter in a different PCI Express slot

• Use the drivers that came with the adapter or download the latest

• Make sure your motherboard has the latest BIOS

• Try to reboot the server

• Reseat the adapter in its slot or a different slot, if necessary

• Try using another cable

• Reinstall the drivers for the network driver files may be damaged or deleted

• Reboot the server

• Try removing and re-installing all adapters

• Check that cables are connected properly

• Make sure your motherboard has the latest BIOS

• Try another port on the switch

• Make sure the cable is securely attached

• Check you are using the proper cables that do not exceed the recommended lengths

• Verify that your switch and adapter port are compatible

• Check that the latest driver is loaded

• Check that both the adapter and its link are set to the same speed and duplex settings

• When [ adapter's current power consumption ] >  [ PCIe slot advertised power limit ] – a warning message appears in the server's system even logs (Eg. dmesg: "Detected insufficient power on the PCIe slow")

• It's recommended to use a PCIe slot that can supply enough power.

• If a message of the following format appears – "mlx5_core 0003:01:00.0: port_module:254:(pid 0): Port module event[error]: module 0, Cable error, One or more network ports have been powered down due to insufficient/unadvertised power on the PCIe slot" please upgrade your Adapter's firmware.

• If the message remains – please consider switching from Active Optical Cable (AOC) or transceiver to Direct Attached Copper (DAC) connectivity.

cat /etc/issue
uname -a
cat /proc/cupinfo | grep ‘model name’ | uniq
ofed_info -s
ifconfig -a
ip link show
ethtool <interface>
ethtool -i <interface_of_Mellanox_port_num>
ibdev2netdev

lspci | grep -i Mellanox

Download and install MFT: MFT Documentation
Refer to the User Manual for installation instructions.
Once installed, run:
mst start
mst status
flint -d <mst_device> q

ibstat
ibv_devinfo

To download the latest firmware version, refer to the NVIDIA Update and Query Utility.

cat /var/log/messages
dmesg >> system.log
journalctl (Applicable on new operating systems)
cat /var/log/syslog

From the Windows desktop choose the Start menu and run: msinfo32
To export system information to a text file, choose the Export option from the File menu.
Assign a file name and save.

Download and install MFT: MFT Documentation
Refer to the User Manual for installation instructions.
Once installed, open a CMD window and run:
WinMFT
mst start
mst status
flint –d <mst_device> q

vstat

Download the latest firmware version using the PSID/board ID from here.
flint –d <mst_device> –i <firmware_bin_file> b

• Event log viewer

• MST device logs:
  

  • mst start

  • mst status

• flint –d <mst_device> dc > dump_configuration.log

• mstdump <mst_device> dc > mstdump.log