NVIDIA ConnectX-6 Dx Ethernet Adapter Cards for OCP Spec 2.0 User Manual

Linux Driver Installation

This section describes how to install and test the MLNX_OFED for Linux package on a single server with an NVIDIA ConnectX-6 Dx adapter card installed.

Prerequisites

Requirements

Description

Platforms

A server platform with ConnectX®-6 Dx (EN) (firmware: fw-ConnectX6 Dx)

Required Disk Space for Installation

1GB

Operating System

Linux operating system.
For the list of supported operating system distributions and kernels, please refer to the MLNX_OFED Release Notes file.

Installer Privileges

The installation requires administrator (root) privileges on the target machine.

Downloading MLNX_OFED

  1. Verify that the system has an NVIDIA network adapter installed.
    The following example shows a system with an installed NVIDIA adapter card:

    # lspci -v | grep Mellanox
    86:00.0 Network controller [0207]: Mellanox Technologies Family
            Subsystem: Mellanox Technologies Device 0014
    86:00.1 Network controller [0207]: Mellanox Technologies Family
            Subsystem: Mellanox Technologies Device 0014
    


    For Linux driver installation, please refer to NVIDIA DOCA Installation Guide for Linux.

Last updated: