This section includes history of bug fixes of 3 major releases back. For older releases history, please refer to the relevant firmware versions Release Notes in https://docs.mellanox.com/category/adapterfw.
|
Internal Ref. |
Issue |
|---|---|
|
4358171 |
Description: Fixed an issue where enabling DIM could lead to high IRQ/s in certain scenarios. |
|
Keywords: vDPA, DIM |
|
|
Discovered in Version: 20.39.4098 |
|
|
Fixed in Release: 20.39.5050 |
|
Internal Ref. |
Issue |
|---|---|
|
4152704 |
Description: Fixed an issue that resulted in firmware assertion 0x889f with CQ reference counter underflow. |
|
Keywords: Firmware assertion 0x889f |
|
|
Discovered in Version: 20.39.3560 |
|
|
Fixed in Release: 20.39.4098 |
|
|
4000741 / 3611679 |
Description: Fixed an issue that resulted in RX traffic halt upon a sudden failure on the host. In this case, the following log message is presented: "DETACH_FROM_MCG(0×807) timeout. Will cause a leak of a command resource / wait_func_handle_exec_timeout:1064:(pid 123313): cmd4: 2ERR_QP(0×507) No done completion”. |
|
Keywords: RX traffic |
|
|
Discovered in Version: 20.39.3560 |
|
|
Fixed in Release: 20.39.4098 |
|
|
4149510 |
Description: Fixed an issue that resulted in setup crash when |
|
Keywords: mbox |
|
|
Discovered in Version: 20.39.3560 |
|
|
Fixed in Release: 20.39.4098 |
|
|
4149393 |
Description: Added address validation in MLNX OEM CMD 0x0032 (get debug info) to be 4-bytes aligned. |
|
Keywords: Address validation, 0x0032 |
|
|
Discovered in Version: 20.39.3560 |
|
|
Fixed in Release: 20.39.4098 |
|
|
4148357 |
Description: Fixed the MPLS packets discards flow when the GLOBAL pause capability is disabled. |
|
Keywords: Global Pause |
|
|
Discovered in Version: 20.39.3560 |
|
|
Fixed in Release: 20.39.4098 |
|
Internal Ref. |
Issue |
|---|---|
|
3887760
|
Description: Fixed an issue that caused Completion Timeout to mistakenly be treated as Advisory Non-Fatal error. Now Completion Timeout is treated as uncorrectable error. |
|
Keywords: Completion Timeout, Advisory Non-Fatal error |
|
|
Discovered in Version: 20.39.2048 |
|
|
Fixed in Release: 20.39.3560 |
|
Internal Ref. |
Issue |
|---|---|
|
3669258
|
Description: Fixed a rare issue that prevented changes in mlxconfig from taking effect upon warm reboot. |
|
Keywords: mlxconfig |
|
|
Discovered in Version: 20.38.1900 |
|
|
Fixed in Release: 20.39.2048 |
|
|
3668253
|
Description: Removed the unmapped module in the INI to prevent firmware assert due to invalid local port (0x7f unmapped). |
|
Keywords: INI, firmware assert |
|
|
Discovered in Version: 20.38.1900 |
|
|
Fixed in Release: 20.39.2048 |
|
Internal Ref. |
Issue |
|---|---|
|
3376815 |
Description: Fixed an issue that caused Completion Timeout to mistakenly be treated as Advisory Non-Fatal error. Now Completion Timeout is treated as uncorrectable error. |
|
Keywords: Completion Timeout, Advisory Non-Fatal error |
|
|
Discovered in Version: 20.38.1002 |
|
|
Fixed in Release: 20.39.1002 |
|
|
3605363
|
Description: Get Temperature OEM command now always returns a unified temperature. |
|
Keywords: Temperature |
|
|
Discovered in Version: 20.38.1002 |
|
|
Fixed in Release: 20.39.1002 |
|
Internal Ref. |
Issue |
|---|---|
|
3365411
|
Description: Fixed a link failure that occurred due to a wrong 'is_inphi_cable' indication. |
|
Keywords: Link failure |
|
|
Discovered in Version: 20.37.1014 |
|
|
Fixed in Release: 20.38.1002 |
|
|
3331179
|
Description: Improved token calculation. |
|
Keywords: Token calculation |
|
|
Discovered in Version: 20.37.1014 |
|
|
Fixed in Release: 20.38.1002 |
|
|
3491841
|
Description: Fixed a firmware assert that occurred when tried to verify if the module supported "swap". |
|
Keywords: Firmware assert |
|
|
Discovered in Version: 20.37.1014 |
|
|
Fixed in Release: 20.38.1002 |
|
Internal Ref. |
Issue |
|---|---|
|
3233061
|
Description: Updated the link maintenance flow to avoid high uncorrectable error rate. |
|
Keywords: Error rate |
|
|
Discovered in Version: 20.31.2354 |
|
|
Fixed in Release: 20.37.1014 |
Last updated: