The chapter contains the following sections:
These are the release notes for the NVIDIA® ConnectX®-6 adapters firmware. This firmware supports the following protocols:
-
InfiniBand - SDR, QDR, FDR, EDR, HDR100, HDR
-
Ethernet - 1GbE, 10GbE, 25GbE, 40GbE, 50GbE1, 100GbE1, 200GbE2
-
PCI Express 4.0, supporting backwards compatibility for v3.0, v2.0 and v1.1
1. Speed that supports both NRZ and PAM4 modes in Force mode and Auto-Negotiation mode.
2. Speed that supports PAM4 mode only.
When connecting an NVIDIA-to-NVIDIA adapter card in ETH PAM4 speeds, Auto-Neg should always be enabled.
Please make sure to use a PCIe slot that can supply the required power to the ConnectX-6 adapter card as stated in section Specifications in the adapter card’s User Manual.
Supported Devices
This firmware supports the devices and protocols listed below:
|
NVIDIA SKU |
Legacy OPN |
PSID |
Device Name |
|---|---|---|---|
|
900-9X603-0056-DT0 |
MCX653106A-EFAT |
MT_0000000219 |
ConnectX-6 VPI adapter card; 100Gb/s (HDR100; EDR IB and 100GbE); dual-port QSFP56; PCIe3.0/4.0 2x8 in a row |
|
900-9X6B4-0056-DT1 |
MCX614106A-CCAT |
MT_0000000220 |
ConnectX-6 EN adapter card; 100GbE; dual-port QSFP56; Socket Direct 2x PCIe3.0 x16; tall bracket; ROHS R6 |
|
900-9X6B4-0058-DT1 |
MCX614106A-VCAT |
MT_0000000221 |
ConnectX-6 EN adapter card; 200GbE; dual-port QSFP56; Socket Direct 2x PCIe3.0 x16; tall bracket; ROHS R6 |
|
900-9X6AF-0016-ST1 |
MCX653105A-ECAT |
MT_0000000222 |
ConnectX-6 VPI adapter card; 100Gb/s (HDR100; EDR IB and 100GbE); single-port QSFP56; PCIe3.0 x16; tall bracket; ROHS R6 |
|
900-9X6AF-0018-MT2 / 900-9X6AF-0018-SS0 |
MCX653105A-HDAT / MCX653105A-HDAL |
MT_0000000223 |
ConnectX-6 VPI adapter card; HDR IB (200Gb/s) and 200GbE; single- port QSFP56; PCIe4.0 x16; tall bracket; ROHS R6 |
|
900-9X6AF-0056-MT1 |
MCX653106A-ECAT |
MT_0000000224 |
ConnectX-6 VPI adapter card; H100Gb/s (HDR100; EDR IB and 100GbE); dual-port QSFP56; PCIe3.0 x16; tall bracket; ROHS R6 |
|
900-9X6AF-0058-ST1 / 900-9X6AF-0058-SS0 |
MCX653106A-HDAT / MCX653106A-HDAL |
MT_0000000225 |
ConnectX-6 VPI adapter card; HDR IB (200Gb/s) and 200GbE; dual-port QSFP56; PCIe4.0 x16; tall bracket; ROHS R6 |
|
900-9X6B4-0018-DT2 |
MCX654105A-HCAT |
MT_0000000226 |
ConnectX-6 VPI adapter card; HDR IB (200Gb/s) and 200GbE; single- port QSFP56; Socket Direct 2x PCIe3.0 x16; tall bracket; ROHS R6 |
|
900-9X6B4-0056-DT0 |
MCX654106A-ECAT |
MT_0000000227 |
ConnectX-6 VPI adapter card; 100Gb/s (HDR100; EDR InfiniBand and 100GbE); dual-port QSFP56; Socket Direct 2x PCIe3.0 x16; tall bracket; ROHS R6 |
|
900-9X6B4-0058-DT0 |
MCX654106A-HCAT |
MT_0000000228 |
ConnectX-6 VPI adapter card; HDR IB (200Gb/s) and 200GbE; dual-port QSFP56; Socket Direct 2x PCIe3.0 x16; tall bracket; ROHS R6 |
|
900-9X6AF-0018-MT1 |
MCX613105A-VDAT |
MT_0000000234 |
ConnectX-6 EN adapter card; 200GbE; single-port QSFP56; PCIe4.0 x16; ROHS R6 |
|
900-9X6AF-0056-ST0 |
MCX613106A-CCAT |
MT_0000000235 |
ConnectX-6 EN adapter card; 100GbE; dual-port QSFP56; PCIe3.0 x16; ROHS R6 |
|
900-9X6AF-0058-MT1 |
MCX613106A-VDAT |
MT_0000000236 |
ConnectX-6 EN adapter card; 200GbE; dual-port QSFP56; PCIe4.0 x16; ROHS R6 |
|
900-9X603-0016-DT0 |
MCX653105A-EFAT |
MT_0000000237 |
ConnectX-6 VPI adapter card; 100Gb/s (HDR100; EDR IB and 100GbE); single-port QSFP56; PCIe3.0/4.0 Socket Direct 2x8 in a row; ROHS R6 |
|
900-9X6B4-0018-DT1 |
MCX614105A-VCAT |
MT_0000000284 |
ConnectX-6 EN adapter card kit; 200GbE; single-port QSFP56; Socket Direct 2x PCIe3.0 x16 |
|
900-9X657-0008-SI0 |
MCX613436A-VDAI |
MT_0000000294 |
ConnectX-6 EN adapter card; 200GbE for OCP 3.0; with host management; Dual-port QSFP56; PCIe 4.0 x16; Internal Lock |
|
900-9X657-0016-SI0 |
MCX653435A-EDAI |
MT_0000000295 |
ConnectX®-6 VPI adapter card, 100Gb/s (HDR100, EDR IB and 100GbE) for OCP 3.0, with host management, Single-port QSFP56, PCIe 3.0/4.0 x16, Internal Lock |
|
900-9X657-0018-SI0 / 900-9X657-0018-SE0 |
MCX653435A-HDAI / MCX653435A-HDAE |
MT_0000000296 |
ConnectX®-6 VPI adapter card, 200Gb/s (HDR IB and 200GbE) for OCP 3.0, with host management, Single-port QSFP56, PCIe4.0 x16, Internal Lock |
|
900-9X657-0058-SI2 / 900-9X657-0058-SB0 |
MCX653436A-HDAI / MCX653436A-HDAB |
MT_0000000297 |
ConnectX®-6 VPI adapter card, 200Gb/s (HDR IB and 200GbE) for OCP 3.0, with host management, Dual-port QSFP56, PCIe4.0 x16, Internal Lock |
|
900-9X628-0016-ST0 |
MCX651105A-EDAT |
MT_0000000473 |
ConnectX®-6 VPI adapter card, 100Gb/s (HDR100, EDR IB and 100GbE, single-port QSFP56, PCIe4.0 x8, tall bracket |
|
900-9X657-0018-MI0 |
MCX653435M-HDAI |
MT_0000000601 |
ConnectX-6 VPI adapter card; 200Gb/s (HDR IB and 200GbE) for OCP 3.0; with host management; Single-port QSFP56; Multi Host or Socket Direct; PCIe4.0 x16; Internal Lock |
Driver Software, Tools and Switch Firmware
The following are the drivers’ software, tools, switch/HCA firmware versions tested that you can upgrade from or downgrade to when using this firmware version:
|
|
Supported Version |
|---|---|
|
ConnectX-6 Firmware |
20.40.1000 /20.39.2048 /20.39.1002 |
|
MLNX_OFED |
24.01-0.3.3.1 /23.10-1.1.9.0 /23.10-0.5.5.0 Note: For the list of the supported Operating Systems, please refer to the driver's Release Notes. |
|
MLNX_EN (MLNX_OFED based code) |
24.01-0.3.3.1 /23.10-1.1.9.0 /23.10-0.5.5.0 Note: For the list of the supported Operating Systems, please refer to the driver's Release Notes. |
|
WinOF-2 |
24.1.50000 /23.10.50000 /23.7.50000 Note: For the list of the supported Operating Systems, please refer to the driver's Release Notes. |
|
MFT |
4.27.0 /4.26.1 /4.26.0 Note: For the list of the supported Operating Systems, please refer to the driver's Release Notes. |
|
mstflint |
4.27.0 /4.26.1 /4.26.0 Note: For the list of the supported Operating Systems, please refer to the driver's Release Notes. |
|
FlexBoot |
3.7.300 |
|
UEFI |
14.33.10 |
|
MLNX-OS |
3.10.5002 onwards |
|
Cumulus |
5.4 onwards |
|
NVIDIA Quantum Firmware |
27.2012.1010 onwards |
|
SwitchX-IB 2 Firmware |
15.2010.5108 onwards |
|
SwitchX-IB Firmware |
11.2008.3328 onwards |
Last updated: