The chapter contains the following sections:
These are the release notes for the NVIDIA® ConnectX®-6 Lx adapters firmware. This firmware supports the following protocols:
-
Ethernet - 1GbE, 10GbE, 25GbE, 50GbE
-
PCI Express 4.0, supporting backwards compatibility for v3.0, v2.0 and v1.1
1. Speed that supports both NRZ and PAM4 modes in Force mode and Auto-Negotiation mode.
When connecting an NVIDIA-to-NVIDIA adapter card in ETH PAM4 speeds, Auto-Neg should always be enabled.
Supported Devices
This firmware supports the devices and protocols listed below:
Refer to the hardware documentation for the list of supported devices.
Driver Software, Tools and Switch Firmware
The following are the drivers’ software, tools, switch/HCA firmware versions tested that you can upgrade from or downgrade to when using this firmware version:
|
|
Supported Version |
|---|---|
|
ConnectX-6 Lx Firmware |
26.47.1026 /26.46.3048 /26.46.1006 |
|
DOCA-HOST |
3.2.0 / 3.1.0 Note: For the list of the supported Operating Systems, please refer to the driver's Release Notes. |
|
WinOF-2 |
25.10.50020 /25.7.50000 /25.4.50020 Note: For the list of the supported Operating Systems, please refer to the driver's Release Notes. |
|
MFT |
4.34.0-145 /4.33.0-169 /4.32.0-120 Note: For the list of the supported Operating Systems, please refer to the driver's Release Notes. |
|
FlexBoot |
3.8.201 |
|
UEFI |
14.40.10 |
|
Cumulus |
5.14.0 |
Last updated: