These are the release notes for the NVIDIA® ConnectX®-7 adapters firmware. This firmware supports the following protocols:
-
InfiniBand - EDR, HDR100, HDR, NDR2002, NDR2
-
Ethernet - 1GbE, 10GbE, 25GbE, 40GbE, 50GbE1, 100GbE1, 200GbE2 200GbE2
-
PCI Express 5.0, supporting backwards compatibility for v4.0, v3.0, v2.0 and v1.1
1. Speed that supports both NRZ and PAM4 modes in Force mode and Auto-Negotiation mode.
2. Speed that supports PAM4 mode only.
Supported Devices
Refer to the hardware
documentation
for the list of supported devices.
Driver Software, Tools and Switch Firmware
The following are the drivers’ software, tools, switch/HCA firmware versions tested that you can upgrade from or downgrade to when using this firmware version:
|
|
Supported Version |
|---|---|
|
ConnectX-7 Firmware |
28.35.8002 /28.35.4554 /28.35.4506 |
|
MLNX_OFED |
5.8-7.0.6.1 /5.8-6.0.4.2 /5.8-5.1.1.2 Note: For the list of the supported Operating Systems, please refer to the driver's Release Notes. |
|
MLNX_EN (MLNX_OFED based code) |
5.8-7.0.6.1 /5.8-6.0.4.2 /5.8-5.1.1.2 Note: For the list of the supported Operating Systems, please refer to the driver's Release Notes. |
|
WinOF-2 |
3.10.52010 /3.10.51000 /3.10.50000 Note: For the list of the supported Operating Systems, please refer to the driver's Release Notes. |
|
MFT |
4.22.1-526 /4.22.1-417 /4.22.1-406 Note: For the list of the supported Operating Systems, please refer to the driver's Release Notes. |
|
FlexBoot |
3.6.902 Note: Please be aware that not all firmware binaries contain FlexBoot or UEFI, support may vary between cards. |
|
UEFI |
14.29.15 Note: Please be aware that not all firmware binaries contain FlexBoot or UEFI, support may vary between cards. |
|
MLNX-OS |
3.10.5002 onwards |
|
Cumulus |
5.4 onwards |
|
NVIDIA Quantum-2 Firmware |
31.2010.5108 onwards |
Last updated: