|
Internal Ref.
|
Issue
|
|---|---|
|
4895260 / 4683339 |
Description: Fixed an issue where QPs established before loading DOCA PCC could exhibit inconsistent algorithm-selected behavior between ports in LAG mode after DOCA PCC is loaded. |
|
Keywords: Congestion Control, DOCA PCC |
|
|
Detected in version: 40.47.1026 |
|
|
Fixed in Release: 40.47.3576 |
|
|
5043712 / 5073671 |
Description: Fixed an issue where a firmware assert was raised because of a write timeout on the GPIO expander. |
|
Keywords: GPIO expander |
|
|
Detected in version: 40.47.2682 |
|
|
Fixed in Release: 40.47.3576 |
|
|
5043581 / 4666196 |
Description: Fixed a PCIe switch initialization issue where upstream traffic was dropped due to ambiguous hardware routing on uninitialized downstream ports, causing downstream devices to disappear from the host. |
|
Keywords: PCIe switch initialization |
|
|
Detected in version: 40.47.2682 |
|
|
Fixed in Release: 40.47.3576 |
|
|
4970550 / 4843342 |
Description: Fixed an issue where one-to-one RoCE traffic using a single QP might not achieve line rate on some platforms when using the default ROCE_CC_COMPATIBILITY_MODE setting in mlxconfig. |
|
Keywords: Congestion control, PCC, ROCE_CC_COMPATIBILITY_MODE |
|
|
Detected in version: 40.46.3004 |
|
|
Fixed in Release: 40.47.3576 |
|
|
4934268 / 4867111 |
Description: Fixed an issue where RoCEv2 TX traffic could be dropped when running the DOCA spcx_cc application due to stale PCC steering extension entries. |
|
Keywords: spcx_cc cc_steering_ext |
|
|
Detected in version: 40.47.1026 |
|
|
Fixed in Release: 40.47.3576 |
|
|
4982511 / 4947006 |
Description: Fixed two rare race conditions in the PCC steering extension when the feature is enabled via path migration, empty RTT, or a custom header. |
|
Keywords: PCC steering extension |
|
|
Detected in version: 40.47.1026 |
|
|
Fixed in Release: 40.47.3576 |
|
|
5071700 / 4928046 |
Description: Fixed a corner-case race condition triggered by DSP resets, causing the link to hang. |
|
Keywords: DSP reset |
|
|
Detected in version: 40.47.1088 |
|
|
Fixed in Release: 40.47.3576 |
|
|
4850603 / 4907678 |
Description: Fixed a rare race condition in the SUSPEND_VHCA command that could cause the command to hang. |
|
Keywords: Live Migration |
|
|
Detected in version: 40.47.1088 |
|
|
Fixed in Release: 40.47.3576 |
|
|
4986774 / 4774410 |
Description: Fixed an issue where the LAG layer steering table had only one strict-SQ entry, causing strict no-port-select traffic to be routed to a single default port. With LOAD_BALANCE_MODE_P1=3, this could lead to link flapping because LACP packets were transmitted only from that default port. The fix expands the LAG layer steering table and adds additional strict-port entries to distribute strict traffic correctly. |
|
Keywords: Link Flapping |
|
|
Detected in version: 40.47.1026 |
|
|
Fixed in Release: 40.47.3576 |
Last updated: