This section includes history of bug fixes of 3 major releases back. For older releases history, please refer to the relevant firmware versions Release Notes.
|
Internal Ref. |
Issue |
|---|---|
|
4087432 |
Description: Increased the RX lossless buffer size to delay the transmission of Pause/PFC frames during NIC congestion. |
|
Keywords: RX lossless buffer size |
|
|
Detected in version: 40.44.0208 |
|
|
Fixed in Release: 40.44.1036 |
|
|
4230051 |
Description: Fixed an issue with configuring the Log FIFO in the operational state. |
|
Keywords: Log FIFO
|
|
|
Detected in version: 40.44.0208 |
|
|
Fixed in Release: 40.44.1036 |
|
|
4249985 |
Description: Fixed an issue where error messages were not sent to the host if the NIC was an EP behind the embedded switch. |
|
Keywords: DSP switch, error message
|
|
|
Detected in version: 40.44.0208 |
|
|
Fixed in Release: 40.44.1036 |
|
|
4209411 |
Description: When querying flow counters with a large number of counters, the process took longer than the dead iris timestamp. The timestamp has been extended to address this issue. |
|
Keywords: Flow counters
|
|
|
Detected in version: 40.44.0208 |
|
|
Fixed in Release: 40.44.1036 |
|
|
4176679 / 4119723 |
Description: Fixed an issue that prevented bandwidth from reaching its line rate when sending RoCE traffic using 1 or 2 QPs over 100GbE or 400GbE link speed with Congestion Control enabled. |
|
Keywords: RoCE, Congestion Control, 400GbE, performance
|
|
|
Detected in version: 40.44.0208 |
|
|
Fixed in Release: 40.44.1036 |
|
Internal Ref. |
Issue |
|---|---|
|
4161303 |
Description: PCI ARCH counters are not supported. Other ARCH counters are supported, but not fully tested. |
|
Keywords: Counters
|
|
|
Detected in version: 40.44.0208 |
|
|
Fixed in Release: 40.44.0212 |
|
|
4202233 |
Description: Address Translation Service (ATS) is at Beta level. Enabling ATS from mlxconfig and stopping the driver can result at a call trace in dmesg. |
|
Keywords: ATS
|
|
|
Detected in version: 40.44.0208 |
|
|
Fixed in Release: 40.44.0212 |
|
|
4220173 |
Description: In firmware version 40.44.0208 , the'max_parse_graph_header_length_base_value' field allows setting higher values than the recommended.
|
|
Keywords: PARSE_GRAPH_NODE Capabilities Layout
|
|
|
Detected in version: 40.44.0208 |
|
|
Fixed in Release: 40.44.0212 |
Last updated: