|
Internal Ref. |
Issue |
|---|---|
|
4286902 |
Description: Fixed a race condition in DPA process termination during the exception flow, where a failed process could be missed and not reported to the user. |
|
Keywords: DPA |
|
|
Detected in version: 40.45.1020 |
|
|
Fixed in Release: 40.46.1006 |
|
|
4401109 |
Description: Fixed an issue where RTTs on IFA1 were not sent when IFA1 and IFA2 were configured in cumulative slots. |
|
Keywords: PCC, multi probe, IFA |
|
|
Detected in version: 40.45.1020 |
|
|
Fixed in Release: 40.46.1006 |
|
|
4486431 |
Description: Fixed an issue where issuing multiple parallel queries of DPA_THREAD objects with the same object ID could fail. |
|
Keywords: DPA |
|
|
Detected in version: 40.45.1020 |
|
|
Fixed in Release: 40.46.1006 |
|
|
4443601 |
Description: Fixed a firmware issue where PXE failed to boot when both LAG ports were up. |
|
Keywords: PXE, LAG |
|
|
Detected in version: 40.45.1020 |
|
|
Fixed in Release: 40.46.1006 |
|
|
4475307 |
Description: Fixed an issue where PCC DCQCN used incorrect parameter values when link speed was 400Gbps or higher. |
|
Keywords: PCC DCQCN, congestion control. |
|
|
Detected in version: 40.45.1020 |
|
|
Fixed in Release: 40.46.1006 |
|
|
4480427 |
Description: Fixed incorrect calculation of start address and mode for the CQE buffer in DPA CQ, which could cause CQEs to be written to the wrong address when the buffer is not 4K-aligned and spans a second page boundary. |
|
Keywords: CQ, CQE Buffer, DPA |
|
|
Detected in version: 40.45.1020 |
|
|
Fixed in Release: 40.46.1006 |
|
|
4402022 |
Description: Fixed an issue where Wake-on-LAN (WoL) may not function correctly on certain multihost configurations. |
|
Keywords: Wake-on-LAN (WoL) |
|
|
Detected in version: 40.45.1020 |
|
|
Fixed in Release: 40.46.1006 |
|
|
4445479 |
Description: Added a fixed estimated power value for Hvdd in the INI configuration. |
|
Keywords: Hvdd |
|
|
Detected in version: 40.45.1020 |
|
|
Fixed in Release: 40.46.1006 |
|
|
4426779 |
Description: Updated the handling of the PLDM Type-5 'Activate Firmware' command to ensure the update flow does not fail when 'self-contained activation' is requested. Although the 'Self Contained Activation Is Not Supported' completion code will still be returned, the component will now be successfully marked as pending. |
|
Keywords: PLDM |
|
|
Detected in version: 40.44.1036 |
|
|
Fixed in Release: 40.46.1006 |
|
|
4318063 |
Description: When running the PTP4L application, the path delay displays inconsistent values after each fwreset and rerun, resulting in a non-constant PPS offset that fails to meet Class B/C requirements. |
|
Keywords: PTP
|
|
|
Detected in version: 40.45.1020 |
|
|
Fixed in Release: 40.46.1006 |
|
|
4163634 |
Description: When connecting a Quantum-3 switch system (with a port split into 8 ports) to a ConnectX-8 single port SuperNIC, the link will not be established. |
|
Workaround: Configure the Quantum-3 switch system port to be split into 2 or 4 ports, or set the ConnectX-8 to operate in multiplane mode. |
|
|
Keywords: Port split, Quantum-3
Detected in version: 40.44.0212 |
|
|
Fixed in Release: 40.46.1006 |
|
|
4366117 |
Description: Configuring a small MTU leads to fragmentation of packets critical for the PXE boot process. As a result, the PXE boot filters mistakenly discard these packets, causing the PXE boot to fail. |
|
Keywords: PXE boot filters |
|
|
Detected in version: 40.45.1020 |
|
|
Fixed in Release: 40.46.1006 |
Last updated: