This section describes how to install and test the DOCA-Host for Linux package on a single server with a ConnectX-9 SuperNIC installed.
Prerequisites
|
Requirements |
Description |
|---|---|
|
Platforms |
A server platform with a ConnectX-9 SuperNIC installed. |
|
Required Disk Space for Installation |
1GB |
|
Operating System |
Linux operating system.
|
|
Installer Privileges |
The installation requires administrator (root) privileges on the target machine. |
Downloading DOCA-Host
Verify that the system has a network adapter installed by running lspci command. The below table provides output examples per ConnectX-9 card configuration.
|
ConnectX-9 Card Configuration |
Output Examples |
|---|---|
|
Single-port Socket Direct Card/MultiHost (2x PCIe x16)
|
|
|
Dual-port Socket Direct Card/MultiHost (2x PCIe x16)
|
In the output example above, the first two rows indicate that one card is installed in a PCI slot with PCI Bus address 05 (hexadecimal), PCI Device number 00, and PCI Function numbers 0 and 1. The other card is installed in a PCI slot with PCI Bus address 82 (hexadecimal), PCI Device number 00, and PCI Function numbers 0 and 1. Since the two PCIe cards are installed in two PCIe slots, each card gets a unique PCI Bus and Device number. Each of the PCIe x16 busses sees two network ports; in effect, the two physical ports of the ConnectX-7 Socket Direct adapter are viewed as four net devices by the system. |
|
Single-port with x16 PCIe Down Stream Port Extension Option
|
|
|
Dual-port PCIe x16 Card
|
|
|
Single-port PCIe x16 Card
|
|
For instructions on downloading DOCA-Host, refer to NVIDIA DOCA Downloads.
Installing DOCA-Host
For Linux driver installation, please refer to NVIDIA DOCA Installation Guide for Linux.
Last updated: