Management Interface Commands

nv show interface

	nv show interface [interface-id] Displays details of an IPoIB/eth0 interface. If not interface is selected, summary of attributes of all interfaces will be displayed.
Syntax Description	interface-id	Name of the interface to display (e.g., eth0)
Default	N/A
History	25.02.2002
Example	admin@nvos:~$ nv show interface ib0 operational applied ----------------------- ----------------------------------------------------------- -------- ip arp-timeout 1800 1800 autoconf disabled disabled dhcp-client state disabled disabled set-hostname enabled enabled is-running no has-lease no dhcp-client6 state disabled disabled set-hostname enabled enabled is-running no has-lease no [gateway] link auto-negotiate on duplex full speed auto mac 80:00:00:02:fe:80:00:00:00:00:00:00:90:0a:84:03:00:76:a8:00 counters in-bytes 72 Bytes in-pkts 1 in-drops 0 in-errors 0 out-bytes 480 Bytes out-pkts 4 out-drops 0 out-errors 0 carrier-transitions 2 mtu 2044 2044 state up up ifindex 8 type ipoib ipoib admin@nvos:~$ nv show interface Interface State Speed MTU Type Description IB speed IB subnet Logical state Physical state Summary --------- ----- ----- ----- -------- ----------- -------- ------------------ ------------- -------------- ------------------------------------------------- eth0 up 1G 1500 eth ip.address: 10.7.89.7/20 ip.address: fdfd:fdfd:7:80:eaeb:d3ff:fe4b:70b8/64 ib0 up 2044 ipoib lo up 65536 loopback ip.address: 127.0.0.1/16 ip.address: ::1/128 sw1p1 down ib infiniband-default Down Polling sw1p2 down ib infiniband-default Down Polling sw2p1 down ib infiniband-default Down Polling . . . sw32p1 up 400G 4096 ib ndr infiniband-default Active LinkUp sw32p2 up 400G 4096 ib ndr infiniband-default Active LinkUp admin@nvos:~$ nv show interface eth0 operational applied ----------------------- ------------------------------------- ------- ip vrf default default arp-timeout 1800 1800 autoconf enabled enabled dhcp-client state enabled enabled set-hostname enabled enabled is-running yes has-lease yes dhcp-client6 state enabled enabled set-hostname enabled enabled is-running yes has-lease no [address] 10.7.89.7/20 [address] fdfd:fdfd:7:80:eaeb:d3ff:fe4b:70b8/64 [gateway] link auto-negotiate on on duplex full full speed 1G 1G mac e8:eb:d3:4b:70:b8 counters in-bytes 2.53 MB in-pkts 15719 in-drops 0 in-errors 0 out-bytes 144.50 KB out-pkts 917 out-drops 0 out-errors 0 carrier-transitions 4 mtu 1500 1500 state up up ifindex 2 type eth eth
REST API	GET https://<ip>/nvue_v1/interface
Related Commands	nv set interface Management Interface Commands \| id (25.02.2002 IB GA)ManagementInterfaceCommands nvshowinterface
Notes

nv show interface link

	nv show interface <interface-id> link {state \| counters} Displays link information of an IPoIB/eth0 interface.
Syntax Description	interface-id	Name of the interface to display, (e.g., eth0)
	state	Show only the data relating to state
	stats	Show only the data relating to statistics
Default	N/A
History	25.02.2002
Example	admin@nvos:~$ nv show interface ib0 link counters operational applied pending ------------------- ----------- ------- ------- carrier-transitions 4 in-bytes 0 Bytes in-drops 0 in-errors 0 in-pkts 0 out-bytes 720 Bytes out-drops 0 out-errors 0 out-pkts 6 `admin@nvos:~$ nv show interface eth0 link operational applied --------------------- ----------------- ------- auto-negotiate on on duplex full full mtu 1500 1500 speed 1G 1G state up up counters carrier-transitions 6 in-bytes 32.84 MB in-drops 0 in-errors 0 in-pkts 209466 out-bytes 16.99 MB out-drops 0 out-errors 0 out-pkts 121334 mac 08:c0:eb:58:7f:90` `admin@nvos:~$ nv show interface eth0 link state operational applied pending -- ----------- ------- ------- up up` `admin@nvos:~$ nv show interface eth0 link counters operational ------------------- ----------- in-bytes 4.20 MB in-pkts 5561 in-drops 0 in-errors 0 out-bytes 1.42 MB out-pkts 2942 out-drops 0 out-errors 0 carrier-transitions 5`
REST API	GET https://<ip>/nvue_v1/interface/<interface-id>/link
Related Commands	Management Interface Commands \| id (25.02.2002 IB GA)ManagementInterfaceCommands nvshowinterface Management Interface Commands \| id (25.02.2002 IB GA)ManagementInterfaceCommands nvsetinterfacelink Management Interface Commands \| id (25.02.2002 IB GA)ManagementInterfaceCommands nvunsetinterfacelink
Notes

nv set/unset interface link connection-mode

	nv set interface <interface-id> link connection-mode {value} nv unset interface <interface-id> link connection-mode Change the interface connection-mode value according to his peer connectivity.
Syntax Description	interface-id	Name of the interface to display.
	value	The connection-mode values: xdr/ndr
Default	XDR
History	25.02.2002
Example	`$ nv set interface swA1p1 link connection-mode ndr`
REST API	PATCH https://<ip>/nvue_v1/interface/{interface-id}/link
Related Commands	nv show interface swA1p1 link
Notes	This command is only supported on Q3200-RA system.

nv show interface ip

	nv show interface <interface-id> ip {address\|dhcp-client\|dhcp-client6\|gateway} Displays IP configuration and state of an IPoIB/eth0 interface.
Syntax Description	interface-id	Name of the interface to display, (e.g. ib0, eth0)
	address	Display the ip address configuration of an IPoIB/eth0 interface.
	dhcp-client	Display the DHCPv4 configuration and state of an IPoIB/eth0 interface.
	dhcp-client6	Display the DHCPv6 configuration and state of an IPoIB/eth0 interface.
	gateway	Display the ip gateway configuration of an IPoIB/eth0 interface.
Default	N/A
History	25.02.2002
Example	`admin@nvos:~$ nv show interface eth0 ip operational applied -------------- ------------------------------------- ------- vrf default default arp-timeout 1800 1800 autoconf enabled enabled dhcp-client state enabled enabled set-hostname enabled enabled is-running yes has-lease yes dhcp-client6 state enabled enabled set-hostname enabled enabled is-running yes has-lease no [address] 10.7.89.7/20 [address] fdfd:fdfd:7:80:eaeb:d3ff:fe4b:70b8/64 [gateway]` `admin@nvos:~$ nv show interface eth0 ip address ------------------------------------- 10.7.144.154/21 fdfd:fdfd:7:145::1000:454c/128 fdfd:fdfd:7:145:ac0:ebff:fe58:7f90/64` `admin@nvos:~$ nv show interface eth0 ip dhcp-client operational applied ------------ ----------- ------- set-hostname enabled enabled state enabled enabled has-lease yes is-running yes`
REST API	GET https://<ip>/nvue_v1/interface/<interface-id>/ip
Related Commands	nv show interface Management Interface Commands \| id (25.02.2002 IB GA)ManagementInterfaceCommands nvsetinterfaceip Management Interface Commands \| id (25.02.2002 IB GA)ManagementInterfaceCommands nvunsetinterfaceip
Notes

nv set/unset interface link state

	nv set interface link state {value} nv unset interface link state {value} Set/unset the administrative link state of a given IPoIB/eth0 interface.
Syntax Description	interface-id	Name of the interface whose link state to set (e.g.,eth0, ib0)
	value	New value for the link state: {up, down}
Default	N/A
History	25.02.2002
Example	`admin@nvos:~$ nv set interface ib0 link state up` `admin@nvos:~$ nv set interface eth0 link state up`
REST API	PATCH https://<ip>/nvue_v1/interface/<interface-id>/link/state
Related Commands	Management Interface Commands \| id (25.02.2002 IB GA)ManagementInterfaceCommands nvshowinterface Management Interface Commands \| id (25.02.2002 IB GA)ManagementInterfaceCommands nvunsetinterfacelinkstate
Notes

nv unset interface link

	nv unset interface <interface-id> link {state} Sets the administrative link state of a given IPoIB/eth0 interface to the default value of "up".
Syntax Description	interface-id	Name of the interface whose link state to set to default, (e.g., eth0)
Default	N/A
History	25.02.2002
Example	`admin@nvos:~$ nv unset interface ib0 link admin@nvos:~$ nv unset interface ib0 link state` `admin@nvos:~$ nv unset interface eth0 link admin@nvos:~$ nv unset interface eth0 link state`
REST API	PATCH https://<ip>/nvue_v1/interface/<interface-id>/link
Related Commands	Management Interface Commands \| id (25.02.2002 IB GA)ManagementInterfaceCommands nvshowinterface Management Interface Commands \| id (25.02.2002 IB GA)ManagementInterfaceCommands nvsetinterfacelink
Notes	Since state is the only settable attribute of link, the two forms of the command are equivalent.

nv set/unset interface description

	nv set interface <interface-id> description nv unset interface <interface-id> description Sets the description of a given IPoIB/eth0 interface. The unset form of the command sets the description of a given IPoIB/eth0 interface to empty.
Syntax Description	interface-id	Name of the interface whose link state to set, (e.g. ib0, eth0)
	value	New value for the description.
Default	N/A
History	25.02.2002
Example	`admin@nvos:~$ nv set interface ib0 description "IPoIB interface" admin@nvos:~$ nv unset interface ib0 description` `admin@nvos:~$ nv set interface eth0 description "mgmt interface" admin@nvos:~$ nv unset interface eth0 description`
REST API	PATCH https://<ip>/nvue_v1/interface/<interface-id>
Related Commands	Management Interface Commands \| id (25.02.2002 IB GA)ManagementInterfaceCommands nvshowinterface Management Interface Commands \| id (25.02.2002 IB GA)ManagementInterfaceCommands nvunsetinterfacedescription
Notes

nv set/unset interface ip

	nv set interface <interface-id> ip address <ip-prefix-id> nv unset interface <interface-id> ip address <ip-prefix-id> Sets the IP address of a given IPoIB/eth0 interface. The unset form of the command deletes one or more IP addresses assigned to a given IPoIB/eth0 interface.
Syntax Description	interface-id	Name of the interface whose IP address to set, (e.g. ib0, eth0)
	ip-prefix-id	IP address and netmask to assign to the interface.
Default	N/A
History	25.02.2002
Example	`admin@nvos:~$ nv set interface ib0 ip address 10.10.1.1/8` `admin@nvos:~$ nv set interface eth0 ip address 10.10.1.1/8`
REST API	PATCH https://<ip>/nvue_v1/interface/<interface-id>/ip/address
Related Commands	Management Interface Commands \| id (25.02.2002 IB GA)ManagementInterfaceCommands nvshowinterface nv unset interface ip
Notes

nv unset interface

	nv unset interface <interface-id> Sets all attributes of an IPoIB/eth0 interface to default values.
Syntax Description	interface-id	Name of the interface to set to default values, (e.g., eth0)
Default	N/A
History	25.02.2002
Example	`admin@nvos:~$ nv unset interface eth0`
REST API	PATCH https://<ip>/nvue_v1/interface/<interface-id>
Related Commands	Management Interface Commands \| id (25.02.2002 IB GA)ManagementInterfaceCommands nvshowinterface Management Interface Commands \| id (25.02.2002 IB GA)ManagementInterfaceCommands nvsetinterface
Notes

nv set/unset interface link mtu

	nv set interface <interface-id> link mtu <bytes> nv unset interface <interface-id> link mtu Sets the Maximum Transmission Unit (MTU) of this interface. The unset form of the command resets the MTU to its default.
Syntax Description	interface-id	Name of the interface to display, (e.g., eth0)
	bytes	Range: 1280–9000
Default	1500
History	25.02.2002
Example	`admin@nvos:~$ nv set interface eth0 link mtu 1500`
REST API	PATCH https://<ip>/nvue_v1/interface/<interface-id>/link
Related Commands	Management Interface Commands \| id (25.02.2002 IB GA)ManagementInterfaceCommands nvshowinterfacelink
Notes

nv set/unset interface link speed

	nv set interface <interface-id> link speed <speed> nv unset interface <interface-id> link speed Sets the interface speed. The unset form of the command resets the speed setting for this interface to its default value.
Syntax Description	interface-id	Name of the interface to display, (e.g., eth0)
	speed	10M, 100M, 1000M
Default	1000M
History	25.02.2002
Example	`admin@nvos:~$ nv set interface eth0 link speed 100M`
REST API	PATCH https://<ip>/nvue_v1/interface/<interface-id>/link
Related Commands	nv show interface link
Notes

nv set/unset interface link duplex

	nv set interface <interface-id> link duplex <duplex> nv unset interface <interface-id> link duplex Sets the interface duplex. The unset form of the command resets the duplex setting for this interface to its default value.
Syntax Description	interface-id	The interface (e.g., eth0)
	duplex	full, half
Default	full
History	25.02.2002
Example	`admin@nvos:~$ nv set interface eth0 link duplex full`
REST API	PATCH https://<ip>/nvue_v1/interface/<interface-id>/link
Related Commands	nv show interface link
Notes

nv set interface link auto-negotiate

	nv set interface <interface-id> link auto-negotiate <auto> Sets link speed and characteristic auto negotiation.
Syntax Description	interface-id	The interface (e.g., eth0)
	auto	on, off
Default	on
History	25.02.2002
Example	`admin@nvos:~$ nv set interface eth0 link auto-negotiate on`
REST API	PATCH https://<ip>/nvue_v1/interface/<interface-id>/link
Related Commands	Management Interface Commands \| id (25.02.2002 IB GA)ManagementInterfaceCommands nvshowinterfacelink
Notes	This command is currently not supported in IPoIB interfaces.

nv set interface ip autoconf

	nv set interface <interface-id> ip autoconf <autoconf> IPv6 Stateless Address Autoconfiguration (SLAAC)
Syntax Description	interface-id	The interface
	autoconf	enable, disable
Default	Enable
History	25.02.2002
Example	`admin@nvos:~$ nv set interface eth0 ip autoconf enable`
REST API	PATCH https://<ip>/nvue_v1/interface/<interface-id>/ip
Related Commands	nv unset interface ip gateway
Notes

nv set interface ip gateway

	nv set interface <interface-id> ip gateway {gateway-ip} Sets default gateway IP address for an interface.
Syntax Description	interface-id	The interface
	gateway-ip	The gateway IP address
Default	N/A
History	25.02.2002
Example	`admin@nvos:~$ nv set interface eth0 ip gateway 1.1.1.1`
REST API	PATCH https://<ip>/nvue_v1/interface/<interface-id>/ip/gateway
Related Commands	Management Interface Commands \| id (25.02.2002 IB GA)ManagementInterfaceCommands nvshowinterfaceip
Notes

nv set interface ip arp-timeout

	nv set interface <interface-id> ip arp-timeout <time> Sets IPv4 arp timeout (in seconds) for an interface.
Syntax Description	interface-id	The interface
	time	Seconds. Range: 60–28800
Default	1800
History	25.02.2002
Example	`admin@nvos:~$ nv set interface eth0 ip arp-timeout 2100`
REST API	PATCH https://<ip>/nvue_v1/interface/<interface-id>/ip
Related Commands
Notes

nv set/unset interface link breakout

	nv (un)set interface <interface-id> link breakout [mode] Set/unset interface breakout mode.
Syntax Description	interface-id	The interface for which to set breakout.
	mode	The breakout mode to set.
Default	Disabled
History	25.01.1002
Example	`admin@nvos:~$ nv set interface sw1p1 link breakout 2x-ndr` `admin@nvos:~$ nv unset interface sw1p1 link breakout`
REST API	PATCH https://<ip>/nvue_v1/interface/<interface-id>/ip
Related Commands	nv action change system profile breakout-mode enabled
Notes	Breakout configuration may only be applied when system profile allows it (i.e., breakout-mode is enabled). To get the current system profile, run: `nv show system profile` To enable breakout-mode in system profile, run: `nv action change system profile breakout-mode enabled ...`

VRF

nv show vrf

	show vrf {vrf-id}{loopback\|loopback ip\|loopback ip address{ip-prefix-id}} Shows VRFs.
Syntax Description	vrf-id	VRF
	loopback	Return loopback interface details of a VRF.
	loopback ip	Return IP details of a VRF loopback interface.
	loopback ip address	Return details of the IP addresses.
	ip-prefix-id	IPv4 or IPv6 address and route prefix in CIDR notation
	<none>	Shows all VRFs
Default	N/A
Configuration Mode	config
History	25.02.2002
Example	`admin@nvos:~$ nv show vrf Name Table Summary --------- ----- ----------------------- + default 254 IP Address: 127.0.0.1/8 default IP Address: ::1/128 + mgmt 1001 IP Address: 127.0.0.1/8 mgmt IP Address: ::1/128` admin@nvos:~$ nv show vrf mgmt operational applied pending description ------------- ----------- ----------- ----------- ---------------------------------------------------------------------- table 1001 auto auto The routing table number, between 1001-1255, used by the named VRF.... evpn enable off off Turn the feature 'on' or 'off'. The default is 'off'. loopback ip [address] 127.0.0.1/8 127.0.0.1/8 127.0.0.1/8 static IPv4 or IPv6 address [address] ::1/128 ::1/128 ::1/128 ptp enable on on Turn the feature 'on' or 'off'. The default is 'on'. router bgp enable off off Turn the feature 'on' or 'off'. The default is 'off'. ospf enable off off Turn the feature 'on' or 'off'. The default is 'off'. [rib] RIB Routes [static] Routes `admin@nvos:~$ nv show vrf mgmt loopback operational applied pending description ----------- ----------- ----------- ----------- --------------------------- ip [address] 127.0.0.1/8 127.0.0.1/8 127.0.0.1/8 static IPv4 or IPv6 address [address] ::1/128 ::1/128 ::1/128` `admin@nvos:~$ nv show vrf mgmt loopback ip operational applied pending description --------- ----------- ----------- ----------- --------------------------- [address] 127.0.0.1/8 127.0.0.1/8 127.0.0.1/8 static IPv4 or IPv6 address [address] ::1/128 ::1/128 ::1/128` `admin@nvos:~$ nv show vrf mgmt loopback ip address ----------- 127.0.0.1/8 ::1/128` `admin@nvos:~$ nv show vrf mgmt loopback ip address 127.0.0.1/8 operational applied pending description -- ----------- ------- ------- -----------`
REST API	GET https://<ip>/nvue_v1/vrf/{vrf-id}
Related Commands
Notes	FRR must be running to be able to use this command.

nv set interface ip vrf

	nv set interface ip vrf {vrf-name} Assigns an interface to a VRF.
Syntax Description	interface-id	The interface
	vrf-name	The VRF: default/ mgmt
Default	N/A
History	25.02.2002
Example	`admin@nvos:~$ nv set interface eth0 ip vrf mgmt`
REST API	PATCH https://<ip>/nvue_v1/interface/<interface-id>/ip
Related Commands	Management Interface Commands \| id (25.02.2002 IB GA)ManagementInterfaceCommands nvunsetinterfaceipvrf
Notes

IP DHCP Client

nv set interface ip dhcp-client state

	nv set interface <interface-id> ip dhcp-client state {enabled\|disabled} nv unset interface <interface-id> ip dhcp-client Enables/disables DHCP client for an interface. The unset form of the command returns the DHCP client to its default state.
Syntax Description	interface-id	The interface
Default	Enabled
History	25.02.2002
Example	`admin@nvos:~$ nv set interface eth0 ip dhcp-client state enabled`
REST API	PATCH https://<ip>/nvue_v1/interface/<interface-id>/ip/dhcp-client
Related Commands	Management Interface Commands \| id (25.02.2002 IB GA)ManagementInterfaceCommands nvsetinterfaceipdhcp client6state
Notes	Configuring the DHCP client for either IPv4 or IPv6 will set the same configuration for both.

nv set interface ip dhcp-client set-hostname

	nv set interface <interface-id> ip dhcp-client set-hostname {enabled\|disabled} nv unset interface <interface-id> ip dhcp-client set-hostname Allows/disallows DHCP client to set system hostname from DHCP. The unset form of the command returns the system hostname to its default state.
Syntax Description	interface-id	The interface
Default	Enabled
History	25.02.2002
Example	`admin@nvos:~$ nv set interface eth0 ip dhcp-client set-hostname enabled`
REST API	PATCH https://<ip>/nvue_v1/interface/<interface-id>/ip/dhcp-client
Related Commands	nv set interface ip dhcp-client6 set-hostname Management Interface Commands \| id (25.02.2002 IB GA)ManagementInterfaceCommands nvsetinterfaceipdhcp clientstate
Notes	Configuring the DHCP client for either IPv4 or IPv6 will set the same configuration for both.

nv set interface ip dhcp-client6 state

	nv set interface <interface-id> ip dhcp-client6 state {enabled\|disabled} nv set interface <interface-id> ip dhcp-client6 Enables/disables DHCPv6 client for an interface. The unset form of the command returns the DHCPv6 client to its original state.
Syntax Description	interface-id	The interface
Default	Enabled
History	25.02.2002
Example	`admin@nvos:~$ nv set interface eth0 ip dhcp-client6 state enabled`
REST API	PATCH https://<ip>/nvue_v1/interface/<interface-id>/ip/dhcp-client6
Related Commands	nv set interface ip dhcp-client state
Notes	Configuring the DHCP client for either IPv4 or IPv6 will set the same configuration for both.

nv set interface ip dhcp-client6 set-hostname

	nv set interface <interface-id> ip dhcp-client6 set-hostname {enabled\|disabled} nv unset interface <interface-id> ip dhcp-client6 set-hostname Allows/disallows DHCP client to set system hostname from DHCPv6. The unset form of the command returns the DHCP client to its default state.
Syntax Description	interface-id	The interface
Default	Enabled
History	25.02.2002
Example	`admin@nvos:~$ nv set interface eth0 ip dhcp-client6 set-hostname enabled`
REST API	PATCH https://<ip>/nvue_v1/interface/<interface-id>/ip/dhcp-client6
Related Commands	Management Interface Commands \| id (25.02.2002 IB GA)ManagementInterfaceCommands nvsetinterfaceipdhcp clientset hostname nv set interface ip dhcp-client6 state
Notes	Configuring the DHCP client for either IPv4 or IPv6 will set the same configuration for both.

nv action renew interface ip dhcp-client

	nv action renew interface <interface-id> ip dhcp-client Renews DHCPv4 lease for this interface.
Syntax Description	interface-id	The interface
Default	N/A
History	25.02.2002
Example	`admin@nvos:~$ nv action renew interface eth0 ip dhcp-client`
REST API	POST https://<ip>/nvue_v1/interface/<interface-id>/ip
Related Commands
Notes

nv action renew interface ip dhcp-client6

	nv action renew interface <interface-id> ip dhcp-client6 Renews DHCPv6 lease for this interface.
Syntax Description	interface-id	The interface
Default	N/A
History	25.02.2002
Example	`admin@nvos:~$ nv action renew interface eth0 ip dhcp-client6`
REST API	POST https://<ip>/nvue_v1/interface/<interface-id>/ip/dhcp-client6
Related Commands
Notes

Last updated: June 08, 2025