IB Router Commands

	nv action change system profile ib-routing {enabled\|disabled} num-of-swids <1-4> [force] Sets the profile of the system.
Syntax Description	ib-routing	Enables/disables IB routing.
	num-of-swids	Sets the number of SWIDs. Range: 1-4. Valid values are 2-4 when IB routing is enabled, or 1 when IB routing is disabled.
	force	Force the action without asking for user confirmation.
Default	ib-routing: disabled num-of-swids: 1
History	25.02.7002
Example	admin@nvos:~$ nv action change system profile ib-routing enabled num-of-swids 2 The operation will reset the system configuration and initiate a reboot. Type [y] to confirm the system profile change and reboot. Type [N] to abort. Do you want to continue? [y/N] y Action executing ... System will be rebooted, configurations and system files might be deleted Action executing ... admin@nvos:~$ nv action change system profile ib-routing disabled num-of-swids 1 The operation will reset the system configuration and initiate a reboot. Type [y] to confirm the system profile change and reboot. Type [N] to abort. Do you want to continue? [y/N] y Action executing ... System will be rebooted, configurations and system files might be deleted Action executing ...
REST API	POST https://<id>/nvue_v1/system/profile
Related Commands	nv show system profile
Notes

	nv set interface <interface-id> link ib-subnet <subnet-name> nv unset interface <interface-id> link ib-subnet Assigns an IB interface to the specified subnet (SWID). The unset for of the command resets the interface to the default subnet (infiniband-default).
Syntax Description	interface-id	The IB interface name or range of IB interfaces
	subnet-name	The target subnet name: infiniband-default, infiniband-1…infiniband-3
Default	infiniband-default
History	25.02.7002
Example	`admin@nvos:~$ nv set interface sw3-4p1-2 link ib-subnet infiniband-1 admin@nvos:~$ nv config apply -y Warning: IB interface configuration is changed. In order to apply configuration the port will be restarted. Warning: IB subnet configuration is changed. The following ports will be temporarily brought down during the change: sw3p1,sw3p2`
REST API	PATCH https://<ip>/nvue_v1/interface/<interface-id>/link
Related Commands	nv show interface nv show interface link
Notes	Supported for IB ports only. FNM ports do not support ib-subnet configuration. When changing the subnet of an interface, the other port on the same transceiver will be temporarily brought down, even if its subnet is not changing. For example, changing the subnet of `sw1p1` will cause `sw1p2` to be temporarily restarted.

	nv show ib router routing-table Displays the IB routing table with one entry per subnet, showing the subnet name, subnet prefix, and validity status.
Syntax Description	N/A
Default	N/A
History	25.02.7002
Example	`admin@nvos:~$ nv show ib router routing-table IB Subnet Subnet Prefix Valid ------------------ ------------- ----- infiniband-default 1 true infiniband-1 2 true infiniband-2 0 false infiniband-3 0 false`
Related Commands	nv change system profile ib-routing num-of-swids nv set interface link ib-subnet
Notes	For an entry to be valid, at least one port must be assigned to the subnet and in UP state, and a correctly configured SM must be running on that subnet. Valid `true` indicates the routing entry is active and traffic can be routed to/from this subnet.