Supported Devices
Supported NVIDIA Externally Managed Switches
|
Type |
Model |
Latest Tested Firmware Version |
|---|---|---|
|
NDR switches |
|
31.2012.1068 |
|
HDR switches |
|
27.2012.1010 |
|
EDR switches |
|
15.2010.5108 |
Supported NVIDIA Internally Managed Switches
|
Type |
Model |
Latest Tested OS Version |
|---|---|---|
|
NDR switches |
|
MLNX-OS 3.11.1014 |
|
HDR switches |
|
MLNX-OS 3.11.1014 |
|
EDR switches |
|
MLNX-OS 3.10.5002 |
System Requirements
Bare Metal Deployment Requirements
|
Platform |
Type and Version |
|---|---|
|
OS and Kernel
|
64-bit OS:
|
|
CPU(a) |
x86_64 |
|
HCAs |
|
|
OFED(b) |
|
(a) CPU requirements refer to resources consumed by UFM. You can also dedicate a subset of cores on a multicore server. For example, 4 cores for UFM on a 16-core server.
(b) For supported HCAs in each MLNX_OFED version, please refer to MLNX_OFED Release Notes.
(c)UFM v6.15.0 is the last version to support NVIDIA ConnectX-4 adapter cards
From RedHat 9* and onwards, packages with SHA1 signatures are no longer supported. The CONDA package binary is signed with SHA1 signatures and thus, CONDA will not be installed with RedHat 9*.
Two options are available to overcome this.
-
Recommended Option: Run the following command to install Conda (change gpgcheck from 1 to 0):
cat <<EOF > /etc/yum.repos.d/conda.repo [conda] name=Conda baseurl=https://repo.anaconda.com/pkgs/misc/rpmrepo/conda enabled=1 gpgcheck=0 gpgkey=https://repo.anaconda.com/pkgs/misc/gpgkeys/anaconda.asc EOF #install conda yum install conda
-
Alternative Option: Run the following command to set the RedHat 9* system-wide cryptographic policy to use legacy (less-secured) policy:
update-crypto-policies --set LEGACYInstall Conda as instructed by the UFM installation script.
After Conda installation, the policy can be set back to default by running the following command:update-crypto-policies --set DEFAULT
For running SHARP Aggregation Manager within UFM, it is recommended to use MLNX_OFED-5.4.X version or newer.
Installation of UFM on minimal OS distribution is not supported.
UFM does not support systems in which NetworkManager service is enabled.
Before installing UFM on RedHat OS, make sure to disable the service.
Docker Installation Requirements
UFM Docker Container is supported on the standard docker environment (engine).
The following operating systems were tested with Docker Container (as standalone container):
|
Component |
Type and Version |
|---|---|
|
Supported OS |
|
For UFM Docker Container installation in HA mode, please refer to Installation Notes | id (6.16.0 5_4.15.0 5)InstallationNotes BareMetalDeploymentRequirements for the list of operating systems and kernels which support HA.
UFM Server Resource Requirements per Cluster Size
|
Fabric Size |
CPU Requirements* |
Memory Requirements |
Disk Space Requirements |
|
|---|---|---|---|---|
|
Minimum |
Recommended |
|||
|
Up to 1000 nodes |
4-core server |
4 GB |
20 GB |
50 GB |
|
1000-5000 nodes |
8-core server |
16 GB |
40 GB |
120 GB |
|
5000-10000 nodes |
16-core server |
32 GB |
80 GB |
160 GB |
|
Above 10000 nodes |
Contact NVIDIA Support |
|||
UFM GUI Client Requirements
The platform and GUI requirements are detailed in the following tables:
|
Platform |
Details |
|---|---|
|
Browser |
Edge, Internet Explorer, Firefox, Chrome, Opera, Safari |
|
Memory |
|
MFT Package Version
|
Platform |
Details |
|---|---|
|
MFT |
Integrated with MFT version mft-4.27.0-83. |
UFM SM Version
|
Platform |
Type and Version |
|---|---|
|
SM |
UFM package includes SM version 5.18.0 |
Assuming the SM is connected to the production cluster, it can handle any events (IB traps) coming from the fabric that is being built; such events should not affect the routing on the production cluster. If events occurred in the production cluster, the routing could be changed.
However, NVIDIA recommends isolating fabric sections to allow faster bring-ups, faster troubleshooting and misconfiguration avoidance that can cause routing errors. Isolation provides clearer SM and CollectX logs, avoiding warnings/errors from masking real production issues.
UFM NVIDIA SHARP Software Version
|
Platform |
Type and Version |
|---|---|
|
NVIDIA® Scalable Hierarchical Aggregation and Reduction Protocol (SHARP)™ |
UFM package includes NVIDIA SHARP software version 3.6.0 |
Software Update from Prior Versions
The installer detects versions previously installed on the machine and prompts you to run a clean install of the new version or to upgrade while keeping user data and configuration unchanged.
The upgrade from previous versions maintains the existing database and configuration, allowing a seamless upgrade process.
Upgrading UFM Enterprise software version is supported up to two previous GA software versions (GA -1 or -2).
For example, if you wish to upgrade to UFM Enterprise v6.11.0, it is possible to do so only from UFM Enterprise v6.9.0 or v6.10.0.
For detailed installation and upgrade instructions, refer to the UFM Quick Start Guide.
Due to a possible conflict, SM and SHARP installed by the MLNX_OFED must be uninstalled. The installation procedure will detect and print all MLNX_OFED packages that must be removed.
It is recommended to upgrade to the latest UFM version from the last 2 GA releases that came before it. Upgrading from older UFM versions may result in failures.
Last updated: