The following field list of PCI info is supported by telemetry.
node_guid pci_node pcie_index depth fw_version device_id device_technology mvcr_sensor_name mtmp_sensor_name switch_voltage switch_current switch_temperature switch_serial_number switch_part_number capability_mask link_speed_enabled link_width_enabled link_speed_active link_width_active num_of_vfs num_of_pfs lane_reversal port_type pwr_status max_payload_size max_read_request_size pci_power link_peer_max_speed port_state device_status receiver_detect_result life_time_counter life_time_counter_low life_time_counter_high rx_errors tx_errors crc_error_dllp crc_error_tlp tx_overflow_buffer_pkt tx_overflow_buffer_marked_pkt outbound_stalled_reads outbound_stalled_writes outbound_stalled_reads_events outbound_stalled_writes_events effective_ber_coef effective_ber_magnitude effective_ber_pci time_since_last_clear_high time_since_last_clear_low fec_correctable_error_counter fec_uncorrectable_error_counter fber_coef fber_magnitude fber_pci life_time_counter_high_lanes life_time_counter_low_lanes life_time_counter_high_timers life_time_counter_low_timers time_to_boot_image_start time_to_link_image calibration_time time_to_first_perst time_to_detect_state time_to_crs_en time_to_plastic_image_start time_to_iron_image_start perst_handler dl_down correctable_err_msg_sent non_fatal_err_msg_sent fatal_err_msg_sent bdf0 config_cycle16to63usec config_cycle2to7usec config_cycle8to15usec config_cycle[1,64]usec error_counter_lane[0-15] fber_lane[0-15] l0_to_recovery l0_to_recovery_eieos l0_to_recovery_framing l0_to_recovery_retrain l0_to_recovery_ts lane0_physical_position lane[0-15]_fber_coef lane[0-15]_fber_magnitude time_to_l0 times_in_l[1,23]
Last updated: