Bug Fixes in This Version

4219412

Description: Fixed and issue that can cause some of the performance counters to show invalid numbers.
The following counters in the were fixed:

• Under Mellanox WinOF-2 Port Traffic set

  • KBytes Received/Sec

  • Packets Received/Sec

  • KBytes Sent/Sec

  • Packets Sent/Sec

  • KBytes Total/Sec

  • Packets Total/Sec

• Under Mellanox WinOF-2 Port QoS set:

  • KBytes Received/Sec

  • Packets Received/Sec

  • KBytes Sent/Sec

  • Packets Sent/Sec

  • KBytes Total/Sec

  • Packets Total/Sec

  • KBytes Received/Sec

• Under Mellanox WinOF-2 VF Port Traffic set:

  • Packets Received Unicast/Sec

  • Packets Received Broadcast/Sec

  • Packets Received Multicast/Sec

  • Packets Sent Unicast/Sec

  • Packets Sent Broadcast/Sec

  • Packets Sent Multicast/Sec

  • Bytes Received Unicast/Sec

  • Bytes Received Broadcast/Sec

  • Bytes Received Multicast/Sec

  • Bytes Sent Unicast/Sec

  • Bytes Sent Broadcast/Sec

  • Bytes Sent Multicast/Sec

  • Rdma Packets Received Unicast/Sec

  • Rdma Packets Received Multicast/Sec

  • Rdma Packets Sent Unicast/Sec

  • Rdma Packets Sent Multicast/Sec

• Under Mellanox WinOF-2 Diagnostics counters set:

  • Send Completions in Passive/Sec

  • Receive Completions in Passive/Sec

  • Watch Dog Expired/Sec

  • Async EQ Overrun

  • DumpMeNow Calls

• Under Mellanox WinOF-2 Diagnostics Ext 1 counter set:

  • RoCE Adaptive Retransmission

  • RoCE Adaptive Retransmission timeouts

  • RoCE Slow Restart

  • RoCE Slow Restart CNPs

  • RoCE Slow Restart Transmissions

• Under Mellanox WinOF-2 Device Diagnostics counter set:

  • L0 MTT miss/Sec

  • L0 MTT hit/Sec

  • L1 MTT miss/Sec

  • L1 MTT hit/Sec

  • L0 MPT miss/Sec

  • L0 MPT hit/Sec

  • L1 MPT miss/Sec

  • L1 MPT hit/Sec

• Under Mellanox WinOF-2 PCI Device Diagnostics counters set:

  • PCI back-pressure cycles/Sec

  • PCI write back-pressure cycles/Sec

  • PCI read back-pressure cycles/Sec

  • Available PCI BW/Sec

  • Used PCI BW/Sec

• Under Mellanox WinOF-2 Port Diagnostics counter set:

  • RX Kbits phy/Sec

  • RX PCS Symbol Error phy/Sec

  • RX PCS Corrected Bits phy/Sec

  • RX Error Lane0 phy/Sec

  • RX Error Lane1 phy/Sec

  • RX Error Lane2 phy/Sec

  • RX Error Lane3 phy/Sec

• Under Mellanox WinOf-2 SW Backchannel Diagnostics counter set:

  • Supported Capabilities Bitmask

  • Currently Active Capabilities Bitmask

  • Read Config Block OIDs/Sec

  • Write Config Block OIDs/Sec

• Under Mellanox WinOF-2 IB Port counters set

  • Port Receive Data

  • Port Receive Packets

  • Port MultiCast Receive Packets

  • Port Unicast Receive Packets

  • Port Xmit Data

  • Port Xmit Packets

  • Port Receive Switch Relay Errors

  • Port Receive Errors

  • Port Receive Constraint Errors

  • Local Link Integrity Errors

  • Port Xmit Wait

  • Port MultiCast Xmit Packets

  • Port Unicast Xmit Packets

  • Port Xmit Discards

  • Port Xmit Constraint Errors

  • Port Receive Remote Physical Errors

  • Symbol Error

  • VL15 Dropped

  • Link Error Recovery Counter

  • Link Downed

Keywords: Performance counters

Detected in version:

24.10.50010

Fixed in version:

25.1.51010

4182418

Description: Fixed an issue that caused large file transfers over the TMFIFO interface to fail.

Keywords: RSHIM

Detected in version:

24.10.50010

Fixed in version:

25.1.51010

4171097

Description: Fixed an error caused by using a buffer size that was too small.

Keywords: mlxndperf, multi-QP operations, buffer size

Detected in version:

24.10.50010

Fixed in version:

25.1.51010

4171716

Description: Fixed an issue in event ID 401, where the supported speed was displayed as the current speed and vice versa.

Keywords: Speed Event ID 401

Detected in version:

24.10.50010

Fixed in version:

25.1.51010

4199875

Description: Fixed an issue where certain counters in the counter set "Mellanox WinOF-2 VF Port Traffic" would occasionally display an invalid value in perfmon.

Keywords: Counters

Detected in version:

24.10.50010

Fixed in version:

25.1.51010