Dual-slot Controller Cards Specifications
|
Physical |
Size: 9.13 in. x 4.37 in. (232.0 mm x 111.15mm) |
||||
|---|---|---|---|---|---|
|
Connector: Dual Ethernet QSFP28 (copper and optical) |
|||||
|
Protocol Support |
Ethernet: 100GBASE-CR4, 100GBASE-KR4, 100GBASE-SR4, 56GBASE-R4, 550G Ethernet Consortium, 40GBASE-CR4, 40GBASE-SR4, 40GBASE-LR4, 40GBASE-ER4, 25GBASE-CR/CR-S, 25GBASE-SR, 25GBASE-LR, 25G Ethernet Consortium, 10GBASE-SR, 10GBASE-LR, 10GBASE-ER, 10GBASE-CX4, SGMII, 1000BASE-X |
||||
|
Data Rate |
Ethernet |
1/10/25/40/50/100 Gb/s |
|||
|
PCI Express Gen 3.0 / 4.0: SERDES @ 8.0GT/s / 16GT/s, 32 lanes (2.0 and 1.1 compatible) |
|||||
|
Power |
Voltage: 12V |
||||
|
Power |
Airflow (LFM) |
||||
|
@40°C |
@45°C |
||||
|
Typical Power |
Passive Cables |
84W |
800LFM |
900LFM |
|
|
Maximum Power |
Passive Cables |
106W |
800LFM |
900LFM |
|
|
1.5W Active Cables |
109W |
800LFM |
900LFM |
||
|
2.5W Active Cables |
111W |
800LFM |
900LFM |
||
|
3.5W Active Cables |
114W |
800LFM |
900LFM |
||
|
Maximum power available through QSFP28 port: 3.5W |
|||||
|
Environmental |
Temperature
|
Operational |
0°C to 55°C |
||
|
Non-operational |
-40°C to 70°Ca |
||||
|
Humidity |
Operational |
10% to 85% relative humidity |
|||
|
Non-operational |
10% to 90% relative humidity |
||||
|
|
Safety: CB / cTUVus / CE |
||||
|
EMC: CE / FCC / VCCI / ICES / RCM |
|||||
|
RoHS: RoHS Compliant |
|||||
a. The non-operational storage temperature specifications apply to the product without its package.
Single-slot Controller Card Specifications
|
|
Size: 9.13 in. x 4.37 in. (232.0 mm x 111.15mm) |
||||
|---|---|---|---|---|---|
|
Connector: Dual Ethernet QSFP28 (copper and optical) |
|||||
|
Protocol Support |
Ethernet: 100GBASE-CR4, 100GBASE-KR4, 100GBASE-SR4, 56GBASE-R4, 550G Ethernet Consortium, 40GBASE-CR4, 40GBASE-SR4, 40GBASE-LR4, 40GBASE-ER4, 25GBASE-CR/CR-S, 25GBASE-SR, 25GBASE-LR, 25G Ethernet Consortium, 10GBASE-SR, 10GBASE-LR, 10GBASE-ER, 10GBASE-CX4, SGMII, 1000BASE-X |
||||
|
Data Rate |
Ethernet |
1/10/25/40/50/100 Gb/s |
|||
|
PCI Express Gen 3.0 / 4.0: SERDES @ 8.0GT/s / 16GT/s, 32 lanes (2.0 and 1.1 compatible) |
|||||
|
|
Voltage: 12V |
||||
|
Power |
Airflow (LFM) |
||||
|
@40°C |
@45°C |
||||
|
Typical Power |
Passive Cables |
77W |
700LFM |
800LFM |
|
|
Maximum Power |
Passive Cables |
98W |
700LFM |
800LFM |
|
|
1.5W Active Cables |
101W |
700LFM |
800LFM |
||
|
2.5W Active Cables |
103W |
700LFM |
800LFM |
||
|
3.5W Active Cables |
106W |
700LFM |
800LFM |
||
|
Maximum power available through QSFP28 port: 3.5W |
|||||
|
Environmental |
Temperature
|
Operational |
0°C to 55°C |
||
|
Non-operational |
-40°C to 70°Ca |
||||
|
Humidity |
Operational |
10% to 85% relative humidity |
|||
|
Non-operational |
10% to 90% relative humidity |
||||
|
Regulatory |
Safety: CB / cTUVus / CE |
||||
|
EMC: CE / FCC / VCCI / ICES / RCM |
|||||
|
RoHS: RoHS Compliant |
|||||
a. The non-operational storage temperature specifications apply to the product without its package.
LED Interfaces
Networking LED Interfaces
There is a one bi-color I/O LED per port to indicate link status. See the below table for physical and logical link indications in Ethernet Mode.
|
LED Color and State |
Description |
|---|---|
|
Off |
A link has not been established |
|
Blinking Ambera |
6Hz blinking Amber indicates a problem with the physical link |
|
Solid Green |
Indicates a valid link with no active traffic |
|
Blinking Green |
Indicates a valid logical link with active traffic |
a. 1Hz Blinking Amber occurs due to running a beacon command for locating the BF1600 Controller Card
CPLD Revision LEDs Interface
There are four green I/O LEDs to indicate the CPLD revision. The LEDs are located on the BlueField BF1600 Controller Card. See the below table for Revision LEDs.
|
LED Number |
CPLD Revision |
|||
|---|---|---|---|---|
|
D6 |
D7 |
D8 |
D9 |
|
|
Off |
Off |
Off |
Off |
Rev 0 |
|
Off |
Off |
Off |
Solid Green |
Rev 1 |
|
Off |
Off |
Solid Green |
Off |
Rev 2 |
|
Off |
Off |
Solid Green |
Solid Green |
Rev 3 |
|
Off |
Solid Green |
Off |
Off |
Rev 4 |
|
Off |
Solid Green |
Off |
Solid Green |
Rev 5 |
|
Off |
Solid Green |
Solid Green |
Off |
Rev 6 |
|
Off |
Solid Green |
Solid Green |
Solid Green |
Rev 7 |
|
Solid Green |
Off |
Off |
Off |
Rev 8 |
CABLINE-CA II PLUS Connector LED Interfaces
There is one green I/O LED near each CABLINE-CA II PLUS connector indicating the proper connection of the CABLINE-CA II PLUS cable to the card’s connector. See the below two tables for the BF1600 Controller and Auxiliary cards LED specifications.
BF1600 Controller Card Cabline-CA II Plus Connector LED
|
LED Number |
LED state |
Description |
|---|---|---|
|
|
ON |
The CABLINE-CA II PLUS cable is properly connected |
|
OFF |
The CABLINE-CA II PLUS cable is not properly connected |
PCIe Auxiliary Connection Card Cabline-CA II Plus Connector LED
|
LED Number |
LED state |
Description |
|---|---|---|
|
|
ON |
The CABLINE-CA II PLUS cable is properly connected |
|
OFF |
The CABLINE-CA II PLUS cable is not properly connected |
Power-Good Signal LED Interface
There is one green I/O LED to indicate power-good signal. See the below table for LED specifications.
|
LED Number |
LED state |
Description |
|---|---|---|
|
D5 |
ON |
Indicates that all rails are valid and board power is up and running |
|
OFF |
Power Failure |
Last updated: