The chapter contains the following sections:
These are the release notes for the NVIDIA® ConnectX®-6 Lx adapters firmware. This firmware supports the following protocols:
-
Ethernet - 1GbE, 10GbE, 25GbE, 50GbE
-
PCI Express 4.0, supporting backwards compatibility for v3.0, v2.0 and v1.1
1. Speed that supports both NRZ and PAM4 modes in Force mode and Auto-Negotiation mode.
When connecting an NVIDIA-to-NVIDIA adapter card in ETH PAM4 speeds, Auto-Neg should always be enabled.
Supported Devices
This firmware supports the devices and protocols listed below:
Refer to the hardware documentation for the list of supported devices.
Driver Software, Tools and Switch Firmware
The following are the drivers’ software, tools, switch/HCA firmware versions tested that you can upgrade from or downgrade to when using this firmware version:
|
|
Supported Version |
|---|---|
|
ConnectX-6 Lx Firmware |
26.46.1006 /26.45.1020 /26.44.1036 |
|
DOCA-HOST |
3.1.0 / 3.0.0 Note: For the list of the supported Operating Systems, please refer to the driver's Release Notes. |
|
WinOF-2 |
25.7.50000 /25.4.50020 /25.1.51010 Note: For the list of the supported Operating Systems, please refer to the driver's Release Notes. |
|
MFT |
4.33.0-169 /4.32.0-120 /4.31.0-149 Note: For the list of the supported Operating Systems, please refer to the driver's Release Notes. |
|
FlexBoot |
3.8.100 |
|
UEFI |
14.39.13 |
|
Cumulus |
5.13.0 onwards |
Last updated: