|
Internal Ref. |
Issue |
|---|---|
|
2969829
|
Description: On rare occasions, the HDR speed link up time when using the optical module MFA7U10-H010 might take up to 70sec. |
|
Keywords: HDR, link up time, optical cable |
|
|
Discovered in Version: 28.33.2028 |
|
|
Fixed in Release: 28.33.4030 |
|
|
3024199
|
Description: When connecting a ConnectX-7 adapter card to an NVIDIA Quantum switch using the copper cable (MCP1600-E01AE30), the link is Down when in EDR speed. |
|
Keywords: EDR, copper cable, NVIDIA Quantum |
|
|
Discovered in Version: 28.33.2028 |
|
|
Fixed in Release: 28.33.4030 |
|
|
2947588
|
Description: Trying to query/burn the firmware using the flint utility when the image is pending (after firmware burn and before firmware reset), results in the action's failure. |
|
Keywords: flint, query/burn firmware |
|
|
Discovered in Version: 28.33.2028 |
|
|
Fixed in Release: 28.33.4030 |
|
|
3047723
|
Description: When changing the protocols from ETH to IB on two ConnectX-7 adapter cards connected to each other, the ports on both sides must be toggled to get the link up. |
|
Keywords: Linkup, port toggling, protocol change |
|
|
Discovered in Version: 28.33.2028 |
|
|
Fixed in Release: 28.33.4030 |
|
|
3033874 |
Description: Connecting a ConnectX-7 adapter card to either a ConnectX-5 adapter card or to an NVIDIA Spectrum switch system is supported only when using a 100GbE optic cables and when configuring ConnectX-5 or the NVIDIA Spectrum switch system to Force Mode. |
|
Keywords: Linkup connectivity |
|
|
Discovered in Version: 28.33.2028 |
|
|
Fixed in Release: 28.33.4030 |
Last updated: