|
Internal Ref. |
Issue |
|---|---|
|
4578581 / 4626296 |
Description: Fixed an interoperability issue where, when ConnectX-7 communicates with ConnectX-8 using the probe-based algorithm, bandwidth could become extremely low due to probe packets being dropped. |
|
Keywords: Interoperability, Congestion Control, RTT
|
|
|
Detected in version: 28.47.1026 |
|
|
Fixed in Release: 28.48.1000 |
|
|
4786813 |
Description: Fixed an issue where the DPA kernel used unsafe ICM access during process creation/modification, which could cause the DPA kernel to hang during FLR. |
|
Keywords: DPA kernel, FLR
|
|
|
Detected in version: 28.47.1026 |
|
|
Fixed in Release: 28.48.1000 |
|
|
4804664 / 4806969 |
Description: Fixed an issue in the User Debugger “query caps” where it returned only the number of capabilities, not the capability bitmap. |
|
Keywords: User Debugger “query caps”
|
|
|
Detected in version: 28.47.1026 |
|
|
Fixed in Release: 28.48.1000 |
|
|
4859700 / NVbug 5828711 |
Description: Fixed an issue caused by a race condition in standby/boot power sequencing. In certain timing windows, port power-down could be delayed such that the power-up flow detected the port still transitioning to power-down, causing the sequence to fail and leaving the port stuck in a powered-down state. |
|
Keywords: PXE boot |
|
|
Detected in version: 28.47.1026 |
|
|
Fixed in Release: 28.48.1000 |
|
|
4484662 |
Description: Fixed an issue where mlxlink reported 0 values for SNR (media and host) due to incorrect local port mapping in firmware and an incorrect page number used by MFT. |
|
Keywords: mlxlink |
|
|
Detected in version: 28.47.1026 |
|
|
Fixed in Release: 28.48.1000 |
|
|
4744039 |
Description: Fixed an issue where, due to an SMBus release race condition, the I2C bus could become stuck. |
|
Keywords: SMBus, I2C bus |
|
|
Detected in version: 28.47.1026 |
|
|
Fixed in Release: 28.48.1000 |
|
|
4773490 / 4823336 |
Description: Fixed an issue where fuse values were not aligned with the updated values burned across different ConnectX-7 setups. |
|
Keywords: Fuse values |
|
|
Detected in version: 28.47.1026 |
|
|
Fixed in Release: 28.48.1000 |
|
|
4532684 / 4635872 / 4794865 / 4794866 / 4794867 / NVbug 5385446 |
Description: Fixed an issue by improving the ADP-RETX algorithm to avoid re-arming without performing a retransmission. |
|
Keywords: ADP-RETX algorithm |
|
|
Detected in version: 28.47.1026 |
|
|
Fixed in Release: 28.48.1000 |
|
|
4727303 / 4718947 |
Description: Fixed an issue in the steering definers used for LAG with IPv6 traffic. |
|
Keywords: LAG, IPv6 traffic, steering |
|
|
Detected in version: 28.47.1026 |
|
|
Fixed in Release: 28.48.1000 |
|
|
4663915 |
Description: Fixed an issue where a spurious CNP was sent in response to an out-of-sequence packet. |
|
Keywords: PCC, CNP, OOS, RP, NP |
|
|
Detected in version: 28.47.1026 |
|
|
Fixed in Release: 28.48.1000 |
|
|
4450570 / 4780432 / 4780433 |
Description: Fixed an issue where the root complex sent MCTP-over-PCI messages before a BDF was assigned, causing responses to be sent with BDF 0. The fix ensures that MCTP messages routed by ID are ignored until a valid BDF is assigned. |
|
Keywords: MCTP-over-PCI, BDF, MCTP messages |
|
|
Detected in version: 28.47.1026 |
|
|
Fixed in Release: 28.48.1000 |
|
|
4809134 / 4824635 |
Description: Fixed an issue where the steering tables were not updated after enabling partial Spectrum-X capabilities (BTH.AR) via LLPD. |
|
Keywords: Steering tables, LLDP |
|
|
Detected in version: 28.47.1026 |
|
|
Fixed in Release: 28.48.1000 |
|
|
2169950 |
Description: When decapsulation on a packet occurs, the FCS indication is not calculated correctly. |
|
Keywords: FCS |
|
|
Discovered in Version: 28.42.1000 |
|
|
Fixed in Release: 28.48.1000 |
|
|
3735988
|
Description: In IB system, RTT_response_sl feature does not work with Sniffer tools (e.g., Wireshark/Tcpdump/). |
|
Keywords: Health buffer, sniffer, RTT |
|
|
Discovered in Version: 28.40.1000 |
|
|
Fixed in Release: 28.48.1000 |
Last updated: