Networking UFM Telemetry Documentation

Document Revision History

Version

Date

Description

Rev 1.27.1

Nov 18, 2026

Updated the following sections:

  • Changes and New Features in This Release

    • Added support for the PLR Counters extension, Total Time Recovery Telemetry, and XID for excessive NVLink recovery

  • Bug Fixes in This Release

    • Added 21 bug fixes

  • Prometheus Endpoint Support

    • Added "Iteration-End Notification" (UFM_TELEMETRY_NOTIFY_ENDPOINTS, UFM_TELEMETRY_INSTANCE_ID, notification payload)

    • Added "Direct CSV" (configuration, access example, notes)

  • Events

    • Updated "Enable PPCC" (added ppcc_general_settings, ppcc_rp_params, ppcc_np_params, ppcc_stats_query)

    • Added "Switch Temperature Data", "Switch Fan Data", "Switch General Data", "Switch Network Data", "Cable Info", and "PCI Info"

  • Port Counters

    • Added PPRM, SLTR, PEMI Optical Engine Telemetry Parameters Properties, Link Health FEC Measure, PLDS, PLU General Tracer Page, PLU Latched Counters Page, UFM Unhealthy Ports, and UFM Collection

    • Updated the register arguments for SLRIP, SLRP, SLRG, SLSIR, PEMI SNR Samples, the PHY and PDDR registers, the PEMI laser source and module status registers, and General Info

  • NVLink Info

    • Added nvl_fec_mode_fields and nvl_packet_types_counters_fields

  • PCI Info

    • Added the FEC error counters, the fber_* fields (including per-lane), and l0_to_recovery

  • Switch Info

    • Added sw_network_fields

  • Cable Info

    • Added is_cage_manager, the laser fields (laser_restriction, laser_status, laser_enabled, laser_fsm_manager), els_oper_state, els_laser_fault_state, module_production_test_revision_lsb/msb, rx_power_lo_war and per-lane CDR, output-valid and fault fields

    • Removed rx_input_valid and rx_input_valid_change from the cable field list

    • Updated dp_st_lane[0-3] to dp_st_lane[0-7]

  • Ports Counters Info

    • Added counters_context, PPRM, SLTR, PLDS, PLU General Tracer Page, PLU Latched Counters Page, Link Health FEC Measure, PEMI Optical Engine Telemetry Parameters Properties, PEMI Temperature Samples, and UFM Unhealthy Ports

    • Updated the field lists of SLSIR, SLTP, PMDR, PPLL, ARHR, PEMI SNR Samples, PEMI Laser Samples, PEMI Laser Source Essential, PEMI Module Status Properties, PHY Counters, Histograms, Operation Info, Link Down Info, PLR, PPCNT Recovery Counters, and Ports

Last updated: