The chapter contains the following sections:
These are the release notes for the NVIDIA® ConnectX®-6 Lx adapters firmware. This firmware supports the following protocols:
-
Ethernet - 1GbE, 10GbE, 25GbE, 50GbE
-
PCI Express 4.0, supporting backwards compatibility for v3.0, v2.0 and v1.1
1. Speed that supports both NRZ and PAM4 modes in Force mode and Auto-Negotiation mode.
When connecting an NVIDIA-to-NVIDIA adapter card in ETH PAM4 speeds, Auto-Neg should always be enabled.
Supported Devices
Refer to the hardware documentation for the list of supported devices.
Driver Software, Tools and Switch Firmware
The following are the drivers’ software, tools, switch/HCA firmware versions tested that you can upgrade from or downgrade to when using this firmware version:
|
|
Supported Version |
|---|---|
|
ConnectX-6 Lx Firmware |
26.43.8002 /26.43.3608 /26.43.2566 |
|
DOCA-HOST |
2.9.3 / 2.9.2 Note: For the list of the supported Operating Systems, please refer to the driver's Release Notes. |
|
MLNX_OFED |
24.10-3.2.5.0 /24.10-1.1.4.0 /24.10-0.7.0.0 Note: For the list of the supported Operating Systems, please refer to the driver's Release Notes. |
|
MLNX_EN (MLNX_OFED based code) |
24.10-3.2.5.0 /24.10-1.1.4.0 /24.10-0.7.0.0 Note: For the list of the supported Operating Systems, please refer to the driver's Release Notes. |
|
WinOF-2 |
24.10.50010 /24.7.50000 /24.4.50000 Note: For the list of the supported Operating Systems, please refer to the driver's Release Notes. |
|
MFT |
4.30.1-1210 /4.30.1-113 /4.30.1-8 Note: For the list of the supported Operating Systems, please refer to the driver's Release Notes. |
|
mstflint |
4.30.1-1210 /4.30.1-113 /4.30.1-8 Note: For the list of the supported Operating Systems, please refer to the driver's Release Notes. |
|
FlexBoot |
3.7.500 |
|
UEFI |
14.37.13 |
|
Cumulus |
5.11.0.0026 onwards |
Last updated: