These are the release notes for the NVIDIA® ConnectX®-9 SuperNIC firmware.
ConnectX-9 firmware supports the following speeds/protocols:
-
InfiniBand - XDR, NDR
-
Ethernet - 800GAUI8 C2M, 800GAUI4 C2M, 400GAUI2 C2M, 400GAUI4 C2M, 200GAUI1 C2M, 200GAUI2 C2M, 100GAUI1 C2M, 100GAUI1_SFE C2M, 800GAUI8 CR8, 800GAUI4 CR4, 400GAUI2 CR2, 400GAUI4 CR4, 200GAUI1 CR1, 200GAUI2 CR2, 100GAUI1 CR1, 100GAUI1_SFE CR1
-
PCI Express Gen6., supporting backwards compatibility for v5.0, v4.0, v3.0, v2.0 and v1.1
When connecting an NVIDIA-to-NVIDIA adapter card in ETH PAM4 speeds, Auto-Neg should always be enabled.
For additional supported speeds/protocols by the ConnectX-9 ASIC, please refer to the hardware User Manual.
Supported Devices
Refer to the hardware documentation for the list of supported devices.
Driver Software, Tools and Switch Firmware
The following are the drivers’ software, tools, switch/HCA firmware versions tested that you can upgrade from or downgrade to when using this firmware version:
|
|
Supported Version |
|---|---|
|
ConnectX-9 Firmware |
82.49.1014 / 82.48.1000 |
|
DOCA-HOST |
3.4.0 / 3.3.0 Note: For the list of the supported Operating Systems, please refer to the driver's Release Notes. |
|
WinOF-2 |
26.4.50010 / 26.1.50000 Note: For the list of the supported Operating Systems, please refer to the driver's Release Notes. |
|
MFT |
4.36.0-147 / 4.35.0-159 Note: For the list of the supported Operating Systems, please refer to the driver's Release Notes. |
|
FlexBoot |
3.9.101 |
|
UEFI |
14.42.11 |
|
NVOS |
25.02.6000 onwards |
|
Quantum-3 FW (part of NVOS) |
35.2016.2080 onwards |
Last updated: