Settings and Configuration | NVIDIA UFM Cyber-AI Documentation

The directory /opt/ufm/cyber-ai/conf contains the configuration files for the UFM Cyber-AI application. The files cyberai.cfg and scheduler_settings.cfg are the main configuration files.

CyberAI.cfg Basic Configuration Parameters

The basic configurations of cyberai.cfg are listed in the following table:

Section	Key	Type	Default	Description
JobSettings	`retries`	Integer	2	the number of reties to run the analytics jobs when its failed or timedout
JobSettings	`check_interval`	Interval	120 (seconds)	the interval for running health for checking jobs if its get timeout
GRPC	`host`	String	cyberai-plm	name of the docker network that will be used to communicate between plm and worker
	`grpc_port`	Integer	50051	the port that used for communication
	`max_workers`	Integer	10	max number of worker that can be run in parallel
Cleanup	`cleanup_run_interval`	Integer	24	This parameter sets how often (in hours) the cleanup process runs. The system will automatically trigger cleanup operations every 24 hours to remove old files and data
	`files_days_to_keep`	Integer	28	This controls retention for hourly files. The system will keep these files for 28 days before automatically deleting them.
	`files_hours_to_keep`	Integer	24	This specifically controls retention for topology hourly files. These files are kept for only 24 hours before being cleaned up,
SecondaryParams	`ip`	String	172.17.0.1	the IP address of the secondary endpoint/server that will be used. to fetch the telemetry data
	`port`	Integer	9002	The port number on the secondary endpoint where the service is listening
	`url`	String	csv/xcset/cyberai_telemetry	The URL path or endpoint

Scheduler Settings Configuration File

The scheduler_settings.cfg file defines configuration parameters for three categories of tasks: UFM data preparation tasks, telemetry collectors, and analytics jobs.

Section	Key	Description
data_prep_ufm::<task_name>	`interval`	Interval between task runs
	`delay`	Delay before the first run
	`skip_collection`	Enable/Disable task
	`json_collection`	Collect data from a JSON file or from a REST API
data_prep_telemetry::<task_name>	`interval`	Interval between task runs
	`delay`	Delay before the first run
	`timeout`	Maximum execution time before the job times out
	`skip_collection`	Enable/Disable task
analytics_job::<job_name>	`interval`	Interval between job runs
	`delay`	Delay before the first run
	`max_input`	Maximum number of input files to process in a single run
	`standard_timeout`	Maximum execution time before the job times out
	`enabled`	Enable/Disable task

Last updated: June 03, 2026