Security | UFM-SDN App CLI Guide

	ip filter enable no ip filter enable Enables IP filtering. The no form of the command disables IP filtering.
Syntax Description	N/A
Default	Disabled
Configuration Mode	config
History	1.5
Example	`ufmapl [ mgmt-sa ] (config) # no ip filter enable`
Related Commands	show ip filter
Notes

	ip filter chain [FORWARD <clear> <policy> <rule> \| INPUT <clear> <policy> <rule> \| OUTPUT <clear> <policy> <rule>] no ip filter chain Sets the policy, as a default target, for a specified chain. The no form of the command resets the policy to its default.
Syntax Description	clear	Delete all rules from this chain
	policy	Specify default policy for this chain
	rule	Add or modify an IP filtering rule
Default	N/A
Configuration Mode	config
History	1.5
Example	`ufmapl [ mgmt-sa ] (config) # ip filter chain FORWARD clear`
Related Commands	show ip filter
Notes

	show ip filter [all \| configured] Displays IP filtering configuration or status.
Syntax Description	all	Displays IP filtering state (including unconfigured rules)
	configured	Displays IP filtering configuration
Default	N/A
Configuration Mode	Any configuration mode
History	1.5
Example	`ufmapl [ mgmt-sa ] (config) # show ip filter Packet filtering for IPv4: DISABLED Active IPv4 filtering rules (omitting any not from configuration): Chain 'INPUT' No rules. Policy: ACCEPT Chain 'OUTPUT' No rules. Policy: ACCEPT Chain 'FORWARD' No rules. Policy: ACCEPT`
Related Commands	ip filter chain ip filter enable
Notes