Web Server

web auto-logout

	web auto-logout <number-of-minutes> no web auto-logout Configures length of user inactivity before auto-logout of a web session. The no form of the command disables the web auto-logout (web sessions will never logged out due to inactivity).
Syntax Description	number-of-minutes	The length of user inactivity in minutes. 0 disables the inactivity timer (same as a "no web auto-logout" command).
Default	60 minutes
Configuration Mode	config
History	1.5
Example	`ufmapl [ mgmt-sa ] (config) # web auto-logout 60`
Related Commands	show web
Notes	The no form of the command does not automatically log users out due to inactivity.

web enable

	web enable no web enable Enables the web-based management console. The no form of the command disables the web-based management console.
Syntax Description	N/A
Default	Enabled
Configuration Mode	config
History	1.5
Example	`ufmapl [ mgmt-sa ] (config) # web enable`
Related Commands	show web
Notes

web http

	web http {enable \| redirect} no web http {enable \| redirect} Configures HTTP access to the web-based management console. The no form of the command negates HTTP settings for the web-based management console.
Syntax Description	enable	Enable HTTP access to the web-based management console
	redirect	Enables redirection to HTTPS
Default	HTTP is enabled HTTP TCP port is 80 HTTP redirect to HTTPS is disabled
Configuration Mode	config
History	1.5
Example	`ufmapl [ mgmt-sa ] (config) # web http enable`
Related Commands	show web
Notes	If HTTP access is enabled, this specifies whether a redirect from the HTTP port to the HTTPS port should be issued to mandate secure HTTPS access.

web httpd listen

	web httpd listen {enable \| interface <ifName>} no web httpd listen {enable \| interface <ifName>} Enables the listen interface restricted list for HTTP and HTTPS. The no form of the command disables the HTTP server listen ability.
Syntax Description	enable	Enable HTTP access to the web-based management console
	interface	Adds interface to Web server access restriction list (i.e. eth0, eth1)
Default	Listening is enabled All interfaces are permitted
Configuration Mode	config
History	1.5
Example	`ufmapl [ mgmt-sa ] (config) # web httpd enable`
Related Commands	show web
Notes	If enabled, and if at least one of the interfaces listed is eligible to be a listen interface, then HTTP/HTTPS requests will only be accepted on those interfaces. Otherwise, HTTP/HTTPS requests are accepted on any interface.

web https

	web https {certificate {default-cert \| name <name> \| regenerate} \| enable \| ssl} no web https {certificate \| enable \| ssl} Configure HTTPS access to the web-based management console. The no form of the command disables the HTTPS server listen ability.
Syntax Description	certificate	Configure the certificate to use for HTTPS connections default-cert – Configure HTTPS to use the configured default certificate name – Configure the named certificate to be used for HTTPS connections regenerate – Regenerate the system default certificate for HTTPS connections
	enable	Enable HTTPS access o the web-based management console
	ssl	Configure SSL/TLS settings for HTTPS
Default	HTTPS is enabled Default port is 443
Configuration Mode	config
History	1.5
Example	`ufmapl [ mgmt-sa ] (config) # web https enable`
Related Commands	show web web enable
Notes

web sessions

	web session {renewal <minutes> \| timeout <minutes>} no web session {renewal \| timeout} Configures session settings. The no form of the command resets session settings to default.
Syntax Description	renewal	Configures time before expiration to renew a session
	timeout	Configures time after which a session expires
Default	timeout – 2.5 hours renewal – 30 min
Configuration Mode	config
History	1.5
Example	`ufmapl [ mgmt-sa ] (config) # web sessions renewal 30`
Related Commands	show web
Notes

web proxy auth

	web proxy auth {authtype <type>\| basic [password <password> \| username <username>]} no web proxy auth {authtype \| basic {password \| username } Configures authentication settings for web proxy authentication. The no form of the command resets the attributes to their default values.
Syntax Description	type	Configures the type of authentication to use with web proxy. Possible values: basic – HTTP basic authentication none – No authentication
	basic	Configures HTTP basic authentication settings for proxy
	password	A password used for HTTP basic authentication with the web proxy
	username	A username used for HTTP basic authentication with the web proxy
Default	Web proxy is disabled
Configuration Mode	config
History	1.5
Example	`ufmapl [ mgmt-sa ] (config) # web proxy auth authtype basic ufmapl [ mgmt-sa ] (config) # web proxy auth basic username web-user ufmapl [ mgmt-sa ] (config) # web proxy auth basic password web-password`
Related Commands	show web web proxy host
Notes

web proxy host

	web proxy host <ip-address> [port <port-number>] no web proxy Adds and enables a proxy to be used for any HTTP or FTP downloads. The no form of the command disables the web proxy.
Syntax Description	ip-address	IPv4 address
	port	Sets the web proxy default port
Default	1080
Configuration Mode	config
History	1.5
Example	`ufmapl [ mgmt-sa ] (config) # web proxy host 10.10.10.10 port 1080`
Related Commands	show web web proxy auth
Notes

show web

	show web Displays the web configuration.
Syntax Description	N/A
Default	N/A
Configuration Mode	Any configuration mode
History	1.5
Example	ufmapl [ mgmt-sa ] (config) # show web Web User Interface: Web interface enabled: yes Web caching enabled: no HTTP enabled: no HTTP redirect to HTTPS: no HTTPS enabled: yes HTTPS ssl-ciphers: TLS1.2 HTTPS ssl-renegotiation: no HTTPS ssl-secure-cookie: yes HTTPS certificate name: default-cert Listen enabled: yes Listen interfaces: No interface configured. Inactivity timeout: 5 min Session timeout: 10 min Session renewal: 5 min Web file transfer proxy: Proxy enabled: no Web file transfer certificate authority: HTTPS server cert verify: yes HTTPS supplemental CA list: default-ca-list
Related Commands
Notes

Last updated: August 22, 2020