PKey GUIDs Rest API

• Description – allows users to manage PKey GUIDs by getting, adding, and removing GUIDs from PKeys.

• Request URL – /ufmRest/resources/

• Main OperationsAdd GUIDs to PKeyRemove GUIDs from PKeyGet a Specific PKeyGet all PKeysSet GUIDs for PKeyDelete PKeyUpdate QoS for PKey

Create an Empty PKey

• Description: Allows creating a PKey without GUIDs.

• Request URL: POST /ufmRest/resources/pkeys/add

• Request Content Type: Application/json

• Request Data Example:

  {
   "pkey":"0x12",     
   "index0":false,       
   "ip_over_ib":true, 
   "mtu_limit":2,      
   "service_level":0,  
   "rate_limit":2.5     
  }
  

  
  

The required parameters are PKey only, all the others are optional and take the default in case they were not sent.

Add GUIDs to PKey

• Description – adds a list of configured GUIDs to PKey.

• Request URL – POST /ufmRest/resources/pkeys/

• Request Content Type – Application/json

• Request Data Parameters

  Name	Value	Default	Description	Mandatory/ Optional
  guids	["…",… ".."] Each GUID is a hexadecimal string with a minimum length of 16 characters and maximum length of 20 characters	None	List of port GUIDs	Mandatory
  ip_over_ib	Boolean: true/false	True	PKey is a member in a multicast group that uses IP over InfiniBand	Optional
  index0	Boolean: true/false	False	If true, the API will store the PKey at index 0 of the PKey table of the GUID.	Optional
  membership	“full”, “limited”	"full"	“full”- members with full membership can communicate with all hosts (members) within the network/partition “limited” - members with limited membership cannot communicate with other members with limited membership. However, communication is allowed between every other combination of membership types.	Optional
  memberships	[“full”, “limited”, ...] List of “full” or “limited” comma-separated strings. It must be the same length as the GUIDs list. Each value by an index represents a GUID membership.	[]	List of memberships to allow users to create or modify different membership per GUID in same PKey. GUID index 0 in the “guids” list will take index 0 from the memberships list and so on (by order)	This parameter is optional. This parameter conflicts with the “membership” parameter. Users must select either a list of memberships or just one membership for all GUIDs.
  pkey	Hexadecimal string between "0x0"-"0x7fff" exclusive	None	Network PKey	Mandatory

  
  

• Response – N/A

• Status Codes200 – OK400 – bad request

• Request Data Example

  {
  "guids": ["0002c903000e0b72", "0002c903000e0b73"],
  "ip_over_ib": false,
  "index0": true,        
  "membership": "full",
  "pkey": "0x0a12"
  }
  

  
  

• Response – N/A

• Status Codes200 – OK400 – bad request

Remove GUIDs from PKey

• Description – remove a list of configured GUIDs from PKey

• Request URL – DELETE /ufmRest/resources/pkeys/<pkey>/guids/<guid1>,<guid2>,…

• Request Content Type – Application/json

• Request Data Parameters

  Name	Value	Default	Description	Mandatory/ Optional
  guids	["…",… ".."] Each GUID is a hexadecimal string with a minimum length of 16 characters and maximum length of 20 characters	None	List of port GUIDs	Mandatory
  pkey	Hexadecimal string between "0x0"-"0x7fff" exclusive	None	Network PKey	Mandatory

  
  

• Status Codes200 – OK400 Bad request

Get Specific PKey

• Description – returns information about the specified PKey. The "guids_data" parameter enables retrieving information on the GUIDs of the specified PKey as well.

• Request URL – GET /ufmRest/resources/pkeys/<pkey>?guids_data=<boolean><pkey> – hexadecimal pkey in the range of 0x0-0x7fff

• Request Content Type – Application/json

• Response Data Example – without GUID data

  {
      "partition": "api_pkey_0x1", 
      "ip_over_ib": true
  }
  

  
  

• Response Data Example – with GUID data

  {
      "guids": [
          {
              "membership": "full", 
              "guid": "0002c903000e0b78", 
              "index0": false
          }
      ], 
      "ip_over_ib": true, 
      "partition": "api_pkey_0x1"
  }
  

  
  

• Status Codes

  • 200 – OK

Get All PKeys

• Description – returns a list of all PKeys (with or without their associated GUIDs data).

• Request URL – GET /ufmRest/resources/pkeys?guids_data=<boolean>&qos_conf=<boolean>
  guids_data flagFalse – returns a list of all PKeysTrue – returns a list of all PKeys including their associated GUIDsqos_conf flagFalse – returns a list of all PKeys without QoS configurationTrue – returns a list of all PKeys including their associated QoS configurationport_info flagFalse – returns a list of all PKeys without port information detailsTrue – returns a list of all PKeys including their associated port informationmax_ports flag<positive-int-value> – returns a list of all PKeys with port information details for ports with number less than or equal to the provided value

• Request Content Type

• Application/json

• Response Data Example – without GUID data

  ["0x1", "0x2", "0x3"]
  

  
  

• Response Data Example – with GUID data

  {
  "0x3": {
  "guids": [
  {
  "membership": null, "guid": "0002c903000e0b74",
  "index0": false
  },
  {
  "membership": null, "guid": "0002c903000e0b75",
  "index0": false
  }
  ],
  "ip_over_ib": true, "partition": "api_pkey_0x3",
  "qos_conf":{"mtu_limit":4,
               "Rate_limit":300,
                "Service_level":3}
  }, "0x2": {
  "guids": [
  {
  "membership": null, "guid": "0002c903000e0b76",
  "index0": false
  },
  {
  "membership": null, "guid": "0002c903000e0b77",
  "index0": false
  }
  ],
  "ip_over_ib": true, "partition": "api_pkey_0x2",
  "qos_conf":{"mtu_limit":4,
               "Rate_limit":300,
                "Service_level":3
  }, "0x1": {
  "guids": [
  {
  "membership": "full", "guid": "0002c903000e0b78",
  "index0": false
  }
  ],
  "ip_over_ib": true, "partition": "api_pkey_0x1",
  "qos_conf":{"mtu_limit":4,
               "Rate_limit":300,
                "Service_level":3
  }
  }
  

  
  

• Status Codes

  • 200 – OK

Set/Update PKey GUIDs

• Description – sets/updates a list of configured GUIDs for PKey (or overwrites the current list, if found), including Quality-of-Service (QoS) parameters.

• Request URL – PUT /ufmRest/resources/pkeys/

• Request Content Type – Application/json

• Request Data Parameters

  Name	Value	Default	Description	Mandatory/ Optional
  guids	["…",… ".."] Each GUID is a hexadecimal string with a minimum length of 16 characters and maximum length of 20 characters	None	List of port GUIDs	Mandatory
  ip_over_ib	Boolean: true/false	True	PKey is a member in a multicast group that uses IP over InfiniBand	Optional
  index0	Boolean: true/false	False	If true, the API will store the PKey at index 0 of the PKey table of the GUID.	Optional
  membership	“full”, “limited”	"full"	“full”- members with full membership can communicate with all hosts (members) within the network/partition “limited” - members with limited membership cannot communicate with other members with limited membership. However, communication is allowed between every other combination of membership types.	Optional
  memberships	[“full”, “limited”, ...] List of “full” or “limited” comma-separated strings. It must be the same length as the GUIDs list. Each value by an index represents a GUID membership.	[]	List of memberships to allow users to create or modify different membership per GUID in same PKey. GUID index 0 in the “guids” list will take index 0 from the memberships list and so on (by order)	This parameter is optional. This parameter conflicts with the “membership” parameter. Users must select either a list of memberships or just one membership for all GUIDs.
  mtu_limit	value can be 2k or 4k	2	MTU limit	Optional
  service_level	value can be range from 0-15	0	Service level	Optional
  rate_limit	value can be one of the following: 2.5, 10, 30, 5, 20, 40, 60, 80, 120, 14, 56, 112, 168, 25, 100, 200, or 300	2.5	Rate Limit	Optional
  pkey	Hexadecimal string between "0x0"-"0x7fff" exclusive	None	Network PKey	Mandatory

  
  

• Request Data Example

  { 
    "guids": ["0002c903000e0b72", "0002c903000e0b73"], 
    "ip_over_ib" : false, "index0": true, 
    "index0": true,
    "membership": "full",
    "mtu_limit":2, 
    "service_level":0, 
    "rate_limit":2.5,        
    "pkey": "0x0a12"
  }
  

  
  

• Response – N/A

• Status Codes

  • 200 – OK

  • 400 – bad request

  To use this API to trigger Mellanox Scalable Hierarchical Aggregation and Reduction Protocol (SHARP)™ allocations and deallocations, please refer to "NVIDIA SHARP REST API".

  
  

Add Hosts to PKey

• Description - Allows the user to create new Partition key (Pkey) assignments, including all the ports allocated to sent host names. UFM-SLURM plugin reads the following API attributes (ip_over_ib, index0, membership) from ufm_slurm.conf file, and sends them in request body. 

• Request URL - /ufmRest/resources/pkeys/hosts 

• Status Codes200 – OK400 – not found

• Request Data Example: 
  The response is a job and its status depends on the action output. 

  {   
    "hosts_names":"r-ufm51,r-ufm77", 
    "ip_over_ib": true, 
    "index0": false, 
    "membership": "full", 
    "pkey": "0xa12" 
  }
  

  
  

Remove Hosts from PKey

• Description - Using this API allowed the user to remove a list of configured Hosts GUIDs from PKey. 

• Request URL - DELETE /ufmRest/resources/pkeys/<pkey>/hosts/<host_name1>,<host_name2>,… 

• Status Codes200 – OK400 – not found

Delete PKey

• Description – deletes a PKey and all of its configured GUIDs.

• Request URL – DELETE /ufmRest/resources/pkeys/<pkey>

• Status Codes
  200 – OK404 – not found

Update PKey QoS

• Description – updates the QoS configuration for a specific PKey.

• Request URL – PUT /ufmRest/resources/pkeys/qos_conf

• Request Data Example

  {
    "mtu_limit": 4,
    "service_level": 5,
    "rate_limit": 2,
    "pkey": "0x9"
  }
  

  
  

• Notes

  • mtu_limit value can be 2k or 4k

  • service_lever value can be range from 0-15

  • rate_limit value can be one of the following: 2.5, 10, 30, 5, 20, 40, 60, 80, 120, 14, 56, 112, 168, 25, 100, 200, or 300

  • Restarting UFM is required for the PKey QoS configuration to take effect

• Status Codes200 – OK400 – bad request

PKey Version (Last Updated)

• Description – returns the time when PKey data was last modified.

• Request URL – GET /ufmRest/resources/pkeys/last_updated

• Request Data Example

  {
      "last_updated": "Thu Sep  3 11:42:39 UTC 2020"
  }
  

  
  

• Notes

  • Last updated data is not persistent and will be reset when UFM is restarted

  • By default, when no updates are done on PKey data, last_updated value will be null

  • The value of last_updated returned by this REST API will be updated when one of the following REST APIs are called:

    • Add GUIDs to PKey

    • Remove GUIDs from PKey

    • Set GUIDs for PKey

    • Delete PKey

    • Update QoS for PKey

Last updated: May 23, 2024