Networking Minerva User Guide
Networking Minerva User Guide
Breadcrumbs

Configure Anomalies

The Reference Configuration Package contains the baseline recommended configurations for AI Factory anomaly objects, Trends views, and dashboards. If you did not receive the Reference Configuration Package, contact your NVIDIA representative.

The anomaly configuration file is located in the package at:

minerva-configs/anomaly-config/anomaly-detection.json

Enable Anomaly Objects

By default, all anomaly objects are disabled. To enable specific objects:

  1. Copy anomaly-detection.json to the manager node at ~/opt/minerva/etc.

  2. Open anomaly-detection.json in an editor.

  3. Locate the anomaly object you want to enable (for example, anomalyRareSyslogPerAppSev).

  4. Set the enable field to true:

    JSON
    "enable": true

  5. Repeat steps 3–4 for each additional object you want to enable.

  6. Save the file.

No service restart is required — changes are picked up automatically. Depending on data volume and object type, it may take up to 48–72 hours before anomalies appear.

For details on anomaly detection behavior, configuration options, and tuning guidance, see Anomaly Detection.

Last updated: